Cable detector - PCE -180 CBN - Detection of out of course lines - PCE Instruments

Cable Detector - PCE-180 CBN - Offline Detector - PCE Instruments

For off-voltage line detection The CBN PCE-180 cable detector includes a signal transmitter and a highly sensitive receiver. The signal transmitter connects to a cable socket or central wire and sends a codified signal into the cable. In building cables, there is often the problem, to know which cable leads, to which connection and by which direction the cable passes. You need to know, if for example, you want to drill a wall. Thanks to the program, with the receiver it is possible for you to follow the cable, and also to be in a condition to control in the lines without tension the path or follow-up of the cable or central wire, without needing to damage the isolation or to open the walls and furnaces of the cables. On the transmitter or receiver you can adjust the volume and sensitivity. You can check all conventional lines, network cables and coaxial cables. The signal generator has a crocodile clamp and a sector plug. The receiver can also be used to detect cables and other signal generators.

Detector in pocket format

Cable tracking in walls or furnaces

For the detection of line interruptions

Pulse or Continuous Signal RJ-11 and crocodile clamp Connection for headphones

Sensitivity adjustment

High quality case

Standards: IEC / EN 61010-1:01

DELIVERY

1 x Cable detector PCE-180 CBN

1 x transmitter

2 x 9V batteries

1 x Case

1 x Employment Notice

SPECIFICATIONS