Milliohmmeter checker - PCE-MO 2001 - PCE Instruments
Measurement of the ohmic resistance of conductors and coils
The robust design PCE-MO 2001 milliohms auditor will withstand the most demanding uses. The milliohms auditor is intended for a resistance measurement of up to 2000 ohm. It is equipped with a large 3.5-inch liquid crystal display. The measurement is carried out by injecting a constant current of low intensity in order to measure the ohmic resistance of the system. The milliohms auditor is delivered calibrated from factory without a certificate, however if you wish our laboratory is at your disposal to establish a laboratory calibration certificate according to complete and detailed ISO protocol.
The milliohms auditor allows a measurement on the resistance of electric motor reels, electric generator, electric transformers or switching circuits. It is intended for use for road, aviation, marine, industrial or residential facilities. It also allows measurement on "Read" contacts. The milliohms auditor complies with IEC-1010 standards and safety.
Resistance measurement
Installation and component verification
High strength and precision
Allows continuity controls
Indication in case of overtaking range
Regulation: IEC 1010
Optional: ISO calibration certificate
DELIVERY
1 x Milliohmmeter checker PCE-MO 2001
1 x Set of control cables
1 x Network cable
1 x Employment Notice
SPECIFICATIONS
Range of measurement |
0 ... 2000 Ω |
Resolution |
0.1 mΩ 1 mΩ 10 mΩ 0.1 Ω 1 Ω |
0 ... 200 mΩ 200 ... 2000 mΩ 2 ... 20 Ω 20 ... 200 Ω 200 ... 2000 Ω |
Accuracy |
± 0.75 % + 4 digitsrange up to 200 mΩ) ± 0.75 % + 2 digits (from 200 mΩ) |
Test runner |
100 mA 10 mA 1 mA |
0 ... 200 mΩ 200 mΩ ... 20 Ω 20 ... 2000 Ω |
Sampling frequency |
About 0.4 seconds |
Zero |
Manuelle, with a potentiometer |
Entries |
4 |
Overrun range |
"1" appears on the screen |
Screen |
LCD |
Food |
220/240 V AC, 50/60 Hz |
Consumption |
About 2 W |
Operational conditions |
0 ... +50 oC / |
Dimensions |
160 x 120 x 85 mm |
Weight |
680 g |