![Analyseur de puissance Triphasé à 3 phases et mesureur d'harmoniques à mémoire PCE-830-2 - PCE Instruments Analyseur de puissance Triphasé à 3 phases et mesureur d'harmoniques à mémoire PCE-830-2 - PCE Instruments](https://pros-r.com/11310-large_default/power-analyzer-pce-830-2-3-phase-ammeter-pce-instruments.jpg)
Reference: PCE-180 CBN
Brand: PCE INSTRUMENTS
Cable detector - PCE -180 CBN - Detection of out of course lines - PCE Instruments
Cable detector - PCE-180 CBN - detection of dead lines - PCE Instruments 1 year warranty
€153.48 including tax
Power Analyzer - PCE-830-2 - 3-phase ammeter - PCE Instruments
PCE-6802 (1000A) amplifier pinch
3-phase amperometer, power meter and memory harmonic meter, port for PC and software The amperemeter allows for measurements, from one to three phases, of electrical parameters in alternative current networks.
Warranty 1 year
Power Analyzer - PCE-830-2 - 3-phase ammeter - PCE Instruments
Current clamp PCE-6802 (1000A)
3-phase ammeter, energy meter and harmonics meter with memory, PC port and software The ammeter allows measurements, from one to three phases, of electrical parameters in alternating current networks.
In addition to the usual parameters such as voltage, current, frequency, power and energy, this amperometer is capable of measuring harmonics, inter-harmonics and asymmetries according to the specifications of EN50160. The amperemeter can detect network defects such as interruptions, intrusions, temporal or transient overtensions (from 16μs of duration) and measure the corresponding values. The LCD point matrix screen with retro lighting and high contrast is able to show up to 35 parameters at the same time. You can connect up to 3 current clamps simultaneously. In the data recorder mode, it can store up to 17470 measurements (3 phases/4 drivers), and in simpler situations, up to 52400 measurements (1 phase/2 drivers), divided into 85 registers. All this allows the PCE-830 amplifier to be used optimally for long-term analysis. The measured values obtained can be sent to the computer at will and processed with the corresponding analysis software.
The scope of delivery contains everything you need to carry out measurements and analyzes (software and data cable included). Although the ammeter is delivered factory calibrated, it can optionally be calibrated in the laboratory and certified according to ISO regulations (during the first order for annual recalibration)
- Network analysis at: 3 phases/4 drivers, 3 phases/3 drivers, 1 phase/2 drivers, 1 phase/3 drivers
- Measuring actual value (V 123 e I 123 )
- Active power measurement (W, KW, MW, GW)
- Apparent and reactive power measurement (KVA, KVAR) - Power factor (PF), phase angle (Φ)
- Energy and work measurement (Wh, KWh, KVARh, PFh)
- Current measurements from 0.1 mA to 3000 A
- Large screen that shows up to 35 parameters simultaneously (3P4W [=3 phases/4 conducteurs])
- CT conditions (1 to 600) and PT (1 to 3000) programmable
- Indication of superimposed current and voltage waveforms
- 512 KB memory with programmable register intervals (measuring share from 2 to 3000 sec., 17470 values using 3 phase/4 conductor system)
- Indication of waveforms, output parameters and harmonic distortions
- Large LCD screen with illuminated dot matrix - Average power (AD in W, KW, MW)
- Maximum power (MD in W, KW, MW) with programmable period
- Analysis of harmonic distortions up to order 99 of curvature
- On-screen indication of up to 50º harmonic waveform
- Indication of maximum value waveform (1024 measurement values / periods)
- Analysis of absolute distortions (%THD-F)
- Graphical balance diagram with 3-phase system parameters
- Detection of up to 28 transients (time and cycles) at programmable threshold (%)
- 3-phase voltage or asymmetric current (VUR)
- 3 voltage or asymmetric current factor (d0%, d2%)
- USB port optically isolated
- Integrated data register timer and schedule
DELIVERY CONTENT
1 x PCE-830 Ammeter
3 x Amplifier pins according to the set PCE-6802
4 x Insulated socket terminals
4 x 3m safety check line
8 x Piles
1 x Power Adapter
1 x Mallette
1 x USB Cable for PC
1 x Software (English)
1 x Instructions for use
SPECIFICATIONS
Measurement values |
Measuring ranges / resolution / precision |
Watts AC (50 o 60 Hz, PF 0.5 to 1) |
5,0 ... 999,9 W / 0,1 W / ±1% ±0,8 W |
AC current |
10,00 A / 0.01 A / |
AC voltage (50 o 60 Hz, TRMS) |
20.0 ... 500.0 V / 0.1 V / ±0.5% ±5 digits (Measurement between phase and neutral) |
Harmonic distortions of AC voltage |
1 ... 20º / 0.1% / ±1.0% |
AC current harmonics in % |
1 ... 10te / 0,1 % / ±2 % |
Power factor (PF) |
0.00 ... 1.00 / 0.01 / ±0.04 |
Phase shift angle (Phi) |
-180° ... 180° / 0.1° / ±1° |
Total harmonic distortion |
0,0 ... 20,0 % / 0,1 % / ±1 % |
Maximum voltage and AC current measurement |
50Hz / 19μS / ±5 % ±30 digits |
Measurement of the voltage and current AC peak value |
1.00 ... 99.99 / 0.01 / ±5% ±30 digits |
Range frequency in automatic mode |
45 ... 65 Hz / 0.1 Hz / 0.1 Hz |
Memory |
512 kB for 52420 values measuring 1 phase/2 driver |
Port |
USB (optically isolated) |
Software and data cable |
Both in the scope of delivery, for Windows 2000, XP, ME |
Ecran |
Illuminated display, dot matrix LCD |
Food |
8 x 1.5 V type AA (Mignon) |
Dimensions |
257 x 155 x 57mm |
Weight |
1160g |
Environmental conditions |
Max. 85% relative humidity / -10 ... 50 ºC |
Type of protection / regulations |
IEC 61010, 600 V/CAT III |
Current clamp PCE-6802 (1000A) |
Reference: PCE-180 CBN
Brand: PCE INSTRUMENTS
Cable detector - PCE-180 CBN - detection of dead lines - PCE Instruments 1 year warranty
Reference: PCE-DC 20
Brand: PCE INSTRUMENTS
Pliers PCE-DC 20 - PCE Instruments AC/DC digital controller with direct frequency measurement in the clamp / LCD screen / Automatic shutdown / current measurement up to 1000 A / For mobile use / Clamp opening: 40 mm Warranty 1 year
Reference: PCE-DC2
Brand: PCE INSTRUMENTS
PCE-DC2 digital ammeter to indirectly measure AC/DC current and resistances - PCE Instruments Digital ammeter for AC/DC current, voltage and resistance / Maximum opening of the 18 mm clamp Warranty 1 year
Reference: PCE-PCM 1
Brand: PCE INSTRUMENTS
Multimètre PCE-PCM 1 mesureur à usage multiple pour déterminer la puissance absorbée - PCE Instruments Multimètre avec une mémoire interne, port USB et logiciel / Mesure de la puissance pour 3 phases / Mesureur d'énergie / TRMS
Reference: PCE-CTI 10
Brand: PCE INSTRUMENTS
PCE-CTI 10 Wireless current clamp - PCE Instruments TRMS current detector with Bluetooth 4.0 / Range: 0 ... 1500 V AC/DC / Extensible up to 3000 A AC with flexible current clamp / VFD mode / Start current measurement / Optional: Calibration Certificate Warranty 1 year
Reference: PCE-DC 41
Brand: PCE INSTRUMENTS
PCE-DC 41 current clamp for DC/AC- PCE Instruments DC/AC / maniable / HOLD function and maximum point / automatic switch function / long battery Warranty 1 year
Reference: PCE-123
Brand: PCE INSTRUMENTS
Process Calibrator - PCE-123 - Running, temperature, voltage... - PCE Instruments Process heater for the simulation and measurement of electrical input signals as well as frequency and temperature Warranty 1 year
Reference: PCE-DC 9EV
Brand: PCE INSTRUMENTS
The PCE-DC 9V Recharge Point EVSE Controller is also known as: Recharge Point Tester, Charge E-station Control Adapter, Digital Universal Controller, Amperometer, Multimeter, Current Sensor, Power Grips EVSE charging point controller with a range measuring 0 to 1000 A CA/CC / Frequency Measurement / Small compact design / Starting current measurement /...
Power Analyzer - PCE-830-2 - 3-phase ammeter - PCE Instruments
PCE-6802 (1000A) amplifier pinch
3-phase amperometer, power meter and memory harmonic meter, port for PC and software The amperemeter allows for measurements, from one to three phases, of electrical parameters in alternative current networks.
Warranty 1 year