Coating Measuring - PCE-CT 5000H - PCE Instruments
Coating detector for non-destructive control / For a measurement of metal bases F and N / Internal memory / Automatic disconnect / Setting limit values / Calibration of 1 to 4 points and calibration of the zero point
The coating detector is a device that quickly determines the thickness of iron and non-ferrous metal coatings. The coating detector automatically detects the basic type. Once you have started the device, it is ready to measure. The measurement method is non-destructive, allowing to continue to use the surface on which the test is performed. The principle of operation is magnetic induction for ferrous metals and the Courant de Foucault for non-ferrous metals.
Before performing a measurement, you can set the limit values of the coating detector. If the measured value exceeds the established limit values, the screen will display a message indicating whether it is too thin or too large in the measured area. This is particularly useful for the control of the inputs and outputs of the goods, since the use of a coating detector allows to quickly and accurately verify the quality of the coating.
- Immediate action
- Vast range of measurement
- High precision
- V-roll at the head level
- Use in one hand
- indication in μm/mm and mils (commutable)
DELIVERY
1 x PCE-CT 5000H
1 x USB cable
1 x F calibration plate
1 x N calibration plate
5 x Calibration standards
1 x Software
1 x Pile
1 x Transport trunk
1 x User manual
SPECIFICATIONS
|
Sonde
|
Type F and Type N
|
|
Range type F
|
0 ... 5000 μm
|
|
Measuring principle Type F
|
Magnetic induction
|
|
Accuracy Type F
|
± (2 % + 1 μm)
|
|
Resolution Type F
|
0 ... 99.9 μm: 0.1 μm
100 ... 999 μm: 1 μm
≥1000 μm: 0.01mm
|
|
Minimum base material thickness
|
0.02 mm
|
|
Range type N
|
0 ... 3000 μm
|
|
Measuring principle Type N
|
Courant de Foucault
|
|
Type N
|
± (2 % + 1 μm)
|
|
Resolution Type N
|
0 ... 99.9 μm: 0.1 μm
100 ... 999 μm: 1 μm
≥1000 μm: 0.01mm
|
|
Minimum base material thickness
|
0.05 mm
|
|
Calibration
|
Calibration from 1 to 4 points
Calibration point zero
|
|
Memory
|
Direct measurement (without data recording)
4 data groups (automatic data recording up to 2000 values)
|
|
Statistical function
|
Number of measurements, average, minimum, maximum, standard deviation
|
|
Measuring units
|
μm, mm, mils
|
|
Sound signal
|
Setting limit values, indication of sound signal symbol if exceeding limits
|
|
Minimum curvature radius (convex)
|
5 mm
|
|
Minimum curvature radius (concave)
|
25 mm
|
|
Minimum measuring surface
|
Diameter: 20 mm
|
|
Number of maximum measures
|
2 measurements per second
|
|
Interface
|
Data transfer by USB
|
|
Food
|
2 x 1.5 V batteries, type AAA
|
|
Menu
|
German, English, Russian, Chinese
|
|
Operating conditions
|
0 ... +50 °C, 20 ... 90 % H.r.
|
|
Storage temperature
|
-10 ... +60 °C
|
|
Regulation
|
CE ROHS FCC
|
|
Dimensions
|
110 x 53 x 24 mm
|
|
Case material
|
ABS
|
|
Weight
|
92 g
|
Warranty 1 year
