Coating Measuring - PCE-CT 25 FN - PCE Instruments
Measurement of layer on ferric (Fe) and non-ferric (NFe) metals
The layer clip is used to quickly and accurately measure the thickness of metal coating. Compared to other devices, it is not necessary to indicate to this layers thicket if the base is an iron or non-ferric metal since the device automatically recognizes it. The compact and compact design allows you to use it with one hand. Although its design is reduced, it measures one range up to 1500 μm, with a precision of ± (3% + 1 μm).
You can view the values on the screen in μm, mm and mils. In addition to measuring the coating thickness, the layer thickness can indicate the maximum, minimum and average value of a series of measurements. The device also integrates the automatic shutdown function.
- Reduced and compact design
- Rapid measurement rate
- Calibration standards included
- Selection of different units
- Allows continuous measures
- Easy use with one hand
- Optional: Calibration Certificate
DELIVERY
1 x PCE-CT 25FN
5 x Calibration standards
1 x Ferric base (Fe)
1 x Non-ferric base (NFe)
1 x 9 V stack
1 x User manual
SPECIFICATIONS
Range of measurement
|
0 ... 1500 μm
|
Resolution
|
0.1 μm 1 μm
|
0 ... 100 μm 100 ... 1500 μm
|
Accuracy
|
± (3% + 1 μm)
|
Units
|
μm, mm, mils
|
Minimum curvature radius
|
Convexe Concave
|
5 mm 25 mm
|
Minimum measuring surface
|
Ø 20 mm
|
Minimum substrate thickness
|
Fe NFe
|
0.3 mm 0.05 mm
|
Measuring frequency
|
Max. 2 Hz
|
Food
|
1 x 9 V battery
|
Operational conditions
|
-10 ... +50 °C, 20 ... 90 % H.r. without condensation
|
Storage conditions
|
-10 ... +60 °C, 20 ... 90 % H.r. without condensation
|
Carcasse
|
ABS
|
Dimensions
|
143 x 85 x 39 mm
|
Weight
|
90 g
|