MoonRay Solar Charge Controller 160 MPPT for 160W PV - SUNBEAM System
DEVELOPED AND TEST IN REAL METURIOLOGICAL CONDITIONS
MPPT CONTROL FOR JUSQU AT 160W PV
• MPPT performance.
– Optimal performance in all conditions.
– Minimum consumption (
• Optimized Shadow. Unmatched yield in shade and light conditions.
• Optimized for UN with several solar panels in parallel.
No limitation when using simple solar panels.
Avoid sensitive serial installations and enjoy the full potential of solar panels in parallel.
– Regroup several MoonRay for an optimized large network.
• Application SUNBEAMsystem Multi Connect
- Connect via the Bluetooth dongle with all the information at hand.
– Direct connection to several MoonRay for large solar panels.
– Connect and network with other units of the SUNBEAM system.
• 5 years warranty.
The new MoonRay MPPT solar charging controllers are really optimized for use on yachts and motorhomes. MoonRay surpasses other MPPT charging controllers. Tested in perfect weather and "real" conditions. Its performance exceeds those of others under conditions of obscurcation or partial shade.
The MoonRay is optimized for a typical installation on a boat or motorhome. Often, with a single solar panel or two solar panels connected in parallel. Recharge of one or more 12V batteries.
Thanks to its versatility, it is also possible to use several MoonRay together. Piloting solar panels. This allows to optimize each group. Thus, you can create groups according to the constantly evolving conditions on a mobile platform. Thanks to the Multi Connect application, it is possible to collect information from all controllers as if they were only one.
*If you intend to connect your Moonray MPPT charging controller to a 24V system, note that you will need to use two or more serially connected solar panels.
MOONRAY DOES NOT COMME LES AUTRES CONTRÔLEURS DE CHARGE SOLAIRE
Installation of a solar panel system on a yacht or motorhome can be difficult. The solar panel industry focuses mainly on large fixed installations. However, SUNBEAMsystem aims to manufacture equipment for non-stationary vehicles and boats. This requires that the configurations of the solar system are very different from those of a domestic installation. We can identify five things that are essentially different in our sector of activity.
Partial shade is much more common.
Less or one solar panel
Prefer the connection of solar panels in parallel rather than in series
Battery charge 12 V or 24 V* DC, not 230 V AC
The need for energy efficiency and energy conservation (don't waste energy)
Using high-yielding solar cells
*If you intend to connect your Moonray MPPT charging controller to a 24V system, note that you will need to use two or more serially connected solar panels.
WHAT'S UP?
The factors mentioned above are the key to creating a real charge controller optimized for yachts and motorhomes. And not only the porting technology of an installation on the roof of a house.
MoonRay solves all this and here's how optimization works:
The charge will start when the solar panel(s) reaches a voltage of 0.1 V above the battery voltage (sometimes
The energy efficiency curve is extremely flat. You can compare this with a precision controlled combustion engine. Where you have good traction from low diets to high diets. While an older MPPT would be rather very effective at a specific (high) diet only. At the price of having a low or zero exit to lower diets.
The MoonRay is very powerful even if it has a random size not optimized on the solar panel(s). In other words, choose your solar/watt panel size without limitation.
The MoonRay will harvest more during natural fluctuations of power from top to bottom. And is not limited to perfect angles and solar irradiation.
MoonRay has an MPPT algorithm optimized for a lower solar panel voltage. It is also suitable for a Vmp solar panel in the range from 17 to 25 Volts. This to charge a 12V battery with a single solar panel or several solar panels. (remember that the parallel is the best installation of solar panels on a yacht/camping-car)
In addition to this, the self-consumption of 13 mA (14 mA for 320) is at the cutting edge of the industry for a MPPT solar charge controller in this size range. Guarantee a low energy waste.
ELECTRONIC PROTECTIONS
CERTIFICATION OF ELECTRONIC DIX PROTECTIONS IN/IEC62109
CERTIFICATION OF THE NORTH ELECTRIC EMISSIONS (EMC) EN61000-6-1/3
In addition to having all the best electronic protections you can find in the most advanced controllers nowadays. The MoonRay solar charge controller also offers refined protection levels.
Temperature protection with automatic power adjustment
Over-intensity protection with automatic power limitation
Removal of electric transients (for protection of PV and controller)
Warranty 5 years
