12V - 230V 800 VA (750 Watts) Pure Sinus Schuko - VICTRON

Phoenix Inverter compact 12V - 230V 800 VA (750 Watts) Pure Sinus Schuko - VICTRON

VICTRON pure sinus converter ideal to operate appliances such as refrigerators or appliances with a power of less than 750W

It safely transforms the 12V current into 230V with high efficiency (91 to 94%)

Victron calls for the 12/800VA a 16 mm2 wiring for a distance less than 1.5 M and a 100A protective fuse. These elements are performance and safety gages.

High quality, manufactured by the world leader VICTRON (Netherlands)

Rated power: 800 VA (750 watts)

Input voltage: 12V DC current

TECHNICAL DONNECTIONS

Input voltage: 12V (range tolerance: 9.5V to 17V)

Output voltage +/-2 % : 230 V

Output at 25 °C: 750 W

Power of peak: 1500 W

Operating temperature: -20 to +50°C (cooling by fan)

Dimensions (HxLxP in mm): 104x194x305

Weight 6.5 kg

VICTRON PHOENIX converters

VICTRON PHOENIX converters offer outstanding performance: exceptional performance (92% to 94% of the converted power), very high peak power (to cope with a point-of-energy overload, when some electrical appliances start) and very pure and perfectly constant electrical signal.

We recommend these converters for solar installations for small housing or holiday homes, rural electrification, mobile use on yachts or in motorhomes

They may also be used in commercial vehicles or for stationary industrial use (radiocommunication and measurement stations or telecommunication devices).

You can run the Phoenix converters (above 1200VA) in parallel and add their power. The configurations in three-phase are feasible using one or more devices for each phase.

We recommend not to plug the converter onto the solar regulator (consumer output), as in general the nominal power of the regulator is much higher than the maximum output amplifier of the regulator. A Victron converter connects to the battery(s), there is no deep discharge danger, as this type of converter detects when the battery voltage is too low.

VICTRON converter inverters

These Victron inverter converters transform the battery's continuous voltage into a stabilized alternative voltage, with the precision of the quartz: this is called a "Sinus Pur" voltage.

This allows you to power your most sensitive and demanding appliances (e.g., this level of precision is mandatory for microwaves).

The control of these inverters is very simple and the user is informed at any time of the operation status of the converter by light witnesses (DEL).

SinusMax technology allows accurate and high instant power

Developed for professional use, the VICTRON PHOENIX converter range is perfectly suited to the most diverse applications: these converters are compatible with all electrical appliances.

SinusMax technology allows very high instant power, impossible to achieve with conventional high frequency technology. Phoenix inverter converters are thus well suited to the power supply of devices that need a strong start-up call current, such as refrigeration compressors, electric motors and similar equipment.

The converter (or inverter) used in a photovoltaic or wind installation

The 12V/220V converter (also known as the inverter) transforms the continuous current of the batteries (12V, 24V or 48V) into an alternative current 230 volts.

Just connect the terminals located on the converter to the battery caps. The electrical appliances you want to power are then simply connected to the or outlets 220/230 V of the converter (nota: the sum of the power of the devices connected to the converter shall be less than the power indicated for the converter).

It is recommended to minimize the distance of the Cable Regulator - Battery and Battery - Onduleur (inferior to 6m) in order to avoid electricity loss.