Generator KS7000E-ATS - Gasoline - 5.5 kW Single-phase 230V - AVR - Integrated ATS - Electric/manual start - Könner & Söhnen

25 litre tank - 17h to 50% charge - 70 dB(A) - 76.8 kg - Dimensions 80x545x550 mm

One of the unique features of the KS 7000E ATS generator model with electric startup is the ATS function (automatic transfer switch) integrated into the generator. This function allows the generator to turn on automatically when there is a network failure, then switch off automatically when the power is restored.

MOTEUR FABLE

The KS series engines have been specially created for the Könner brand & Söhnen. They spent several hours and several levels of testing. They are reliable, sustainable and economic. Könner engines & Söhnen meets all European quality standards, including the modern environmental standard EURO V.

NUMBER OF INDIVIDUALS

Each engine has an individual serial number, which allows us to control production and service quality. Könner engines & Söhnen have easy startup and produce few vibrations.

SYSTÈME DU COMMUTATEUR DE TRANSFERT AUTOMATIQUE INTÉGRÉ (ATS)

The generator panel with the ATS function (automatic transfer switch) is equipped with the terminals for network connection, a switch of the ATS function and an ATS work indicator. The generator connection diagram to the power grid is shown here.

ERGONOMICAL AND PRACTICES AGAINST ELECTRIC

The ergonomic control panel of the generator with electric start allows to start the generator easily, to control its operation and does not require additional skills. The modern LED screen shows the number of hours worked, frequency and output voltage. The information on the screen allows an optimal monitoring of the condition of the generator and its work and promotes maintenance interventions in case of need thus extending its lifetime.

230V OR 400V

The presented series includes models for current consumers single-phase and three-phase. The generator panel with ATS function has the outlets suitable for connecting 230V and 400V networks.

ALTERNATEUR WITH A 100% ENROLMENT

The Könner generators & Söhnen TM are equipped with a high quality synchronous alternator with 100% copper winding. Only copper winding can maintain maximum loads without any damage and ensures reliable long-term operation of generator.

CONTACT

Reliable switching contacts made 100% copper have an increased power of 40 A, which ensures an uninterrupted long-term operation of the ATS system.

FACILE AND PRACTICES SYSTEM

The easy start-up system allows the engine to start quickly and effortlessly. The more powerful models are also equipped with an electric start system to facilitate use.

RESERVOIR IN ACIER

The Könner generators & Söhnen is equipped with a large steel fuel tank to extend the operating time of the generator without supply. The tank has a fuel level indicator.

DOUBLE SYSTÈME ANTIVIBRATOIRE

All Könner generator models & Söhnen TM are equipped with a double anti-vibration system that reduces noise and extends the operation of the generator. The engines are mounted on high-quality rubber plates. The reinforced steel frame has rubber feet to further reduce vibration, slip and corrosion.

Data sheet:

**In transient modes, the frequency of the current produced may change in the short term, i.e. during normal operation of the current generator, the deviation of the frequency indicator is acceptable. According to the type generator, engine and operating mode, frequency can be between 49 and 54 Hz

*** Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, generator technical status