Motopompe Gasoline KS 80 MW - heavily polluted water - 1000 L/mm 60m3/h - Könner & Shönen
The highly polluted water pump is suitable for pumping dirty water with the maintenance of solid substances of 50% and with a particle diameter of up to 25.4 mm. Before starting the work, the pump must be filled with clean water. After starting, the pump must be stopped after 30 seconds and clean water must be added to the pump to increase its productivity.
Characteristics:
Engine gasoline professional, 4-time, licensed by DIMAX Int. GmbH, Germany.
The reinforced steel chassis with a diameter of 25.4 mm protects the pump from damage and facilitates transport.
Compact size and weight light.
The case is made of high resistance aluminum that is not subject to corrosion, temperature influences and deformation.
Fuel consumption reduced.
Increased productivity.
KÖNNER PROPERTY MOTHER & SÖHNEN
The engines used in the pumps «Könner & Söhnen" is manufactured under the close supervision of German engineers and meets European and global standards of quality, economy and respect for the environment (including harmful emissions and noise levels). All engines are tested for long continuous operation, then dismantled and examined for defects.
INDIVIDUALS SERIES ON MOTHER
Each engine has an individual serial number that allows us to control the quality of production and service. The engines «Könner & Söhnen» are easy to start and produce few vibrations.
EQUIPMENT
The Könner pumps & Söhnen are equipped with a large steel fuel tank, which extends the operating time without filling. The case is made of high-strength molded aluminium, does not yield to corrosion, temperature influences and deformation.
AMORTISSERS FOR REDURES
All models of Könner pumps & Söhnen are equipped with rubber feet to reduce vibration. Thanks to the rubber shock absorbers, the motor pump will not damage the floor covering and the frame will not be scratched.
CARACTERISTICS
Engine model |
KS 280 |
Engine volume, cm3 |
269 |
Engine power, ch |
9.0 |
Fuel tank capacity, L |
6.0 |
Volume of oil crankcase, L |
1.1 |
Sound level, Lpa (7m)/Lwa, dB |
79/104 |
Maximum capacity, L/min |
1000 |
Rated speed, L/min |
3600 |
Maximum lifting height, m |
20 |
Maximum suction depth, m |
7 |
Inlet pipe diameter, mm |
80 |
Inlet pipe diameter, mm |
80 |
Net dimensions (LxlxH) mm |
720x535x600 |
Gross dimensions (LxlxH) mm |
725x540x600 |
Weight net, kg |
60 |
Weight gross, kg |
63 |