DC TECH 12-40 self-priming pallet electroplating fuel - 40 l/mm - 12 V - 2 m cable - ADAM PUMPS
  • DC TECH 12-40 self-priming pallet electroplating fuel - 40 l/mm - 12 V - 2 m cable - ADAM PUMPS

DC TECH 12-40 self-priming pallet electroplating fuel - 40 l/mm - 12 V - 2 m cable - ADAM PUMPS

AP-DC402200

DC TECH 12-40 self-priming pallet electroplating fuel - 40 l/mm - 12 V - 2 m cable - ADAM PUMPS

Fluide fuel - 40 l/min - 12 V - 25 A - 2 m cable included

Warranty 2 years

Reference : AP-DC402200

Get it delivered everywhere in the world

€145.00 VAT excluded
i.e. €174.00 including tax
Quantity

Description

DC TECH 12-40 self-priming pallet electroplating fuel - 40 l/mm - 12 V - 2 m cable - ADAM PUMPS

Self-priming pallet pump equipped with a derivation valve integrated into the pump body.

Continuous current closed motor with permanent magnet, 12-24V. Protection IP 55,

ON-OFF switch, transport handle and attractive design.

attractive design.

  • flow rate 40 l/min
  • Entries/outputs: 3./4" BSP-G
  • Fluide fuel
  • dimensions 220 x 150 x 220 mm
  • Weight 4 kg

Characteristics DC TECH 40

AC voltage (V / Hz) 12 
Engine protection IP 55
Channel yes
Switch/stop yes
Electric power supply (V) 12
Maximum (A) 18
Power (W) 216
Buse (A) 30
Operating cycle (min) S2 30
Nominal flow rate (L/mm: GPM) 40 / 10.57
Maximum pressure [bar / psi] 1.3 / 19
Dry suction height (m) 2
Entrance (BSP - G) 3/4°
Output (BSP - G) 3/4°
Pump body material Fonte
Material wheel Fried steel
Ailette material POM
Ring material HNBR
Attachment material NBR
Engine support Yes
Temperature min/max (°C) 20/50
Maximum fluid viscosity (cSt) (40°C) 2 ÷ 5
Compatible fluids fuel
Unauthorized Gas, alcohol, water, gasoline, kerosene
Sound intensity less than 1 metre (dB)
Weight net (kg) 4
Weight gross (kg) 4.4

Product Details
AP-DC402200

Data sheet

VOLT
12V
l/mm
40 l/mm
Attachments
Download
AP-DC IT-EN

AP-DC DATA SHEET IT-EN

Download (787.67KB)
AP-DC IT-EN

AP-DC TECHNICAL MANUAL IT-EN

Download (2.85MB)
8 other products in the same category: