DC TECH 12-40 self-priming pallet electroplating fuel - 40 l/mm - 12 V - Cable 4 m - ADAM PUMPS
Self-priming pallet pump equipped with a derivation valve integrated into the pump body.
Continuous current closed motor with permanent magnet, 12-24V. Protection IP 55,
ON-OFF switch, transport handle and attractive design.
attractive design.
- Cable 4 m inlcus
- flow rate 40 l/min
- Entries/outputs: 3./4" BSP-G
- Fluide fuel
- dimensions 220 x 150 x 220 mm
- Weight 4 kg
Characteristics DC TECH 40
AC voltage (V / Hz) |
12 |
Engine protection |
IP 55 |
Channel |
yes |
Switch/stop |
yes |
Electric power supply (V) |
12 |
Maximum (A) |
18 |
Power (W) |
216 |
Buse (A) |
30 |
Operating cycle (min) |
S2 30 |
Nominal flow rate (L/mm: GPM) |
40 / 10.57 |
Maximum pressure [bar / psi] |
1.3 / 19 |
Dry suction height (m) |
2 |
Entrance (BSP - G) |
3/4° |
Output (BSP - G) |
3/4° |
Pump body material |
Fonte |
Material wheel |
Fried steel |
Ailette material |
POM |
Ring material |
HNBR |
Attachment material |
NBR |
Engine support |
Yes |
Temperature min/max (°C) |
20/50 |
Maximum fluid viscosity (cSt) (40°C) |
2 ÷ 5 |
Compatible fluids |
fuel |
Unauthorized |
Gas, alcohol, water, gasoline, kerosene |
Sound intensity less than 1 metre (dB) |
|
Weight net (kg) |
4 |
Weight gross (kg) |
4.4 |