Charging station for electric vehicles KS X32/1 - 7 KW - 230V - 32A - 1 phase - Könner & Söhnen

Charging station for electric vehicles KS X32/1 - 7 KW - 230V - 32A - 1 phase - Könner & Söhnen

Output power 7 kW - Nominal voltage 230V - Nominal current 32A - Cable length 5 m - Phase number: 1

Please note that the equipment must be installed by a certified electrician! To benefit from the guarantee, it is imperative to provide a Certificate of Guarantee established by the electrician and present the table completed on page 11 of the annexed manual (attached documents)

The KS X32/1 charging station is a handy and reliable solution for charging electric vehicles. In addition, the charging process is faster and safer. The charging station has built-in overload protection as well as leakage current protection in case of insulation failure and direct contact with a live part.

FAST AND SAFE

The charging station is designed for fast charging of electric cars and has multi-level protection: overheating, unstable voltage, overcurrent, overload, short circuit, adverse weather conditions, and dust. Features: MCB (Miniature Circuit Breaker), grounding connector, monitoring of leakage current due to insulation failure, fault monitoring, IP54 protection class.

Unlike the charging controllers that are plugged into a regular power outlet, the charging station allows charging electric car batteries with a higher capacity.

EV CHARGCHING PLUG TYPE 2

The charging station is equipped with a DIN EN 62196-2 Type 2 connector suitable for most electric vehicles. The 5 m long charging cable provides multiple parking options.

RFID CARD READER FOR PROTECTION AGAINST ELECTRICITY THEFT

Only the RFID card holder can use the RFID card reader to initiate charging. Two RFID cards are included. With the RFID cards and Card Management mode, your charging station is reliably protected from unauthorized use.

THE LOGICIEL WE E-CHARGE

The app is available for iOS and Android OS users and includes features such as remote charging enable/disable, charging status monitoring, energy demand control, and reporting of the charging station's electricity consumption. It supports 10 languages.

RUGGED CASE WITH LCD SCREEN

Könner & Söhnen® KS X series electric vehicle charging stations feature an IP54 case for outdoor use in rain and snow. The case protects the device against water splashing against the case from any angle. The 4.3” LCD screen displays relevant information, and LED lights indicate the charging status. The rugged case is made of high-grade materials, with its front panel made of tempered glass. 

EMERGENCY STOP BUTTON

The emergency stop button allows you to stop charging immediately in an emergency (e.g., fire, smoke, flooding, or other hazards).

SMART LOAD CONTROLLER

We recommend using the KS SLC smart load controller from Könner & Söhnen® to protect the grid from overloading during peak electricity consumption hours when multiple power consumers other than the charging station are connected to the grid at the same time (optional). 

CABLE HOLDER

Cable holder included

CARACTERISTICS