Electric vehicle charging station KS P32/3 - 22 KW - 400V - 32A - 3 phases - Könner & Söhnen
Output power 22 kW - Nominal voltage 400V - Nominal current 32A - Cable length 5 m - Phase number: 3
Please note that the equipment must be installed by a certified electrician! To benefit from the guarantee, it is imperative to provide a Certificate of Guarantee established by the electrician and present the table completed on page 9 of the annexed manual (attached documents)
The charging station for electric vehicles KS P32/3 is a convenient and reliable way to charge an electric vehicle. Recharge is faster and safer. The charging terminal is equipped with integrated protection against overloads and current leaks in the event of failure of insulation and direct contact with one of the current conductive parts.
RAPID AND SECTORY
The terminal is designed for rapid charging of electric vehicles and has multi-level protection against overheating, unstable voltage, over-intensity, short circuit, unfavourable weather conditions and external dust. Equipped with: Landing, control of current leaks due to failure of insulation, control of possible malfunctions, IP65 protection class.
The terminal allows to charge the battery of an electric vehicle with more power than with charge controllers connected to a classic socket.
CHARGE TYPE 2
Equipped with load support type 2 (according to DIN EN 62196-2), which is suitable for most electric vehicle models. The charging cable of 5 m long allows to use different parking options
THE RFID CARTE LECTOR PROTÈGE CONTRE LE VOL D'ÉLECTRICITÉ
The charging station is equipped with a RFID card reader that allows the RFID card owner to start the charge. Two RFID cards are included in the package. With RFID cards and the use of card control mode, you are protected against connections made by unauthorized users
THE LOGICIEL WE E-CHARGE
The software for iOS and Android systems offers functions such as remote activation/deactivation of the charge, control of the state of the charge, control of energy consumption and a report on the power consumption of the charging station. It has 10 different languages.
CONTROL OF THE CHARGE WITH INDICATOR
Durable housing made from high quality materials with a control button. Lights on the front panel indicate the power supply, the eve (green light), the load (blue light) and any errors.
OFFICE FOR MAXIMUM PROTECTION
Könner ' Söhnen® KS P electric vehicle charging stations are made in a housing conforming to the IP65 standard, which offers complete protection against dust penetration and water jets falling from any angle, even under pressure. This device can be used outdoors in all conditions.
SUPPORT OF CABLE AND SUPPORT OF CHARGE
The charging terminal is delivered with a cable support and a load male support, which allows you to protect the load male support from damage in standby mode.
CARACTERISTICS
Number of phases |
3 |
Rated voltage |
400 V |
Rated |
32 A |
Output power |
22 kW |
Cable length |
5 m |
Recommended power cable (copper) |
5x4, 5x6 mm2 |
Input terminal |
L1/L2/L3/N/PE |
Type of charge connection |
Type 2 |
Net dimensions LxLxH |
180x180x65 mm |
Gross dimensions LxLxH |
450x380x150 mm |
Net weight |
6 kg |
Protection class |
IP65 |