Phoenix 12/50 (2+1) 120-240V - VICTRON
The Centaure battery charger series is characterized by an automatic measurement adjustment function for a range 90-265 VAC 50/60 Hz, allowing their universal use. Unlike many other devices that have a universal entry, the Centaure series chargers guarantee a constant output power over the whole of the range specified.
They also offer a three-phase automatic charging process to ensure full and optimal battery loading at all times. In addition, they are equipped with three insulated charge outputs, allowing their adaptation to multiple battery configurations, which makes them compatible with most standard installations.
Available models vary for 12 V and 24 V systems, with capacities ranging from 16 A to 100 A.
Warranty 5 yearsPhoenix 12/50 (2+1) 120-240V - VICTRON
Description
Victron Energy's Phoenix Battery Charger is a high-frequency battery charger. Microprocessor steering ensures a particularly precise battery charge.
The Phoenix charger microprocessor manages the duration of each loading step (Bulk - Absorption - Float - Watch) and automatically adapts to the initial discharge state of the battery. This load management mode comes from the "adaptative" technology developed by Victron Energy.
Product guarantee: 5 years
Technical specifications
Depending on the battery discharge rate, the Phoenix charger automatically adapts to ensure full battery charging.
An important module in battery management and present on the Phoenix charger, the "BatterySafe" mode that avoids premature battery deterioration during large loads.
This charging mode allows to inject a high current associated with a high absorption voltage, but limits the progression of the voltage once the gas voltage is reached.
A watch mode is active as long as the battery is not put into use for 24 hours.
In order to minimize the gas and corrosion of the positive plates, the charger will reduce the voltage from 2.3V to 2.2V per cell or a 13.2V voltage for a 12V battery.
In order to avoid premature aging of batteries, the voltage is raised weekly, which prevents a stratification of the electrolyte and battery sulphate.
To further improve the load quality, Victron Energy's Skylla-i chargers are equipped with 2 probes:
- A first control finger measures the battery temperature to avoid a voltage overload. Depending on the temperature raised, the Skylla-i charger will automatically adjust its load.
- A second probe is present and raises the tension at the battery terminals. This avoids any errors due to losses in the main wiring.
Phoenix chargers are compatible with a continuous power supply of 90 to 400V.
The entire Phoenix range can through the RS485 communication port communicate with a computer. The user manual (available for free on our website) will allow you to customize all your Phoenix charger settings.
Reference: EC-PSC125053085
Brand: VICTRON ENERGY
Phoenix Smart IP43 charger 12/50(3) 230V - VICTRON Automatic compensation, adaptable charging algorithm, compatibility with lithium-ion batteries, walking/stop function. Warranty 5 years
Reference: EC-PSC123053085
Brand: VICTRON ENERGY
Phoenix Smart IP43 Charger 12/30(3) 230V - VICTRON Automatic compensation, adaptable charging algorithm, compatibility with lithium-ion batteries, walking/stop function. Warranty 5 years
Reference: TE-88000355
Brand: MASTERVOLT
Mastervolt isolation transformer - Mass GI 3.5 - 3500W - 16A - IP23 A safe connection between the boat and the dock power is a key point of your electrical installation. Galvanic insulation between the dock and the edge prevents electrolysis on the metal parts while maintaining a good grounding.Warranty 2 years
Reference: TE-38513000
Brand: MASTERVOLT
Combining Mastervolt converter/loader - Mass Combi Pro 12V/3000W-150A -230V This new combined converter/loader combines a smart switching system, a highly efficient MPPT solar charging controller, as well as a second separate charger in a robust and very easy-to-install quality device.Warranty 2 years
Reference: EC-CCH012100000
Brand: VICTRON ENERGY
Centaur Charger 12/100(3) 120-240V - VICTRON The Centaure battery charger series is characterized by an automatic measurement adjustment function for a range 90-265 VAC 50/60 Hz, allowing their universal use. Unlike many other devices that have a universal entry, the Centaure series chargers guarantee a constant output power over the whole of the range...
Reference: EC-BPC121544002
Brand: VICTRON ENERGY
Charger Blue Smart IP22 12/15(3) 230V EWC 7/7 - VICTRON The Blue Smart IP22 is the new professional battery charger with integrated Bluetooth technology! It is ideal for use with a variety of devices in your workshop as well as on your vehicles, such as classic cars, motorcycles, boats and motorhomes. Warranty 5 years
Reference: TE-40021006
Brand: MASTERVOLT
Mastervolt battery charge Mass 24V/100A (230V) DNV GL, Lloyds Mass battery charges are designed for the toughest conditions for professional, semi-professional and recreational purposesWarranty 2 years
Reference: TE-40020756
Brand: MASTERVOLT
Mastervolt Battery Charger - Mass 24V/75A (230V) DNV GL, Lloyds Mass battery chargers are designed for intensive professional use and semi-professional and sporty environments. Warranty 2 years
Phoenix 12/50 (2+1) 120-240V - VICTRON
The Centaure battery charger series is characterized by an automatic measurement adjustment function for a range 90-265 VAC 50/60 Hz, allowing their universal use. Unlike many other devices that have a universal entry, the Centaure series chargers guarantee a constant output power over the whole of the range specified.
They also offer a three-phase automatic charging process to ensure full and optimal battery loading at all times. In addition, they are equipped with three insulated charge outputs, allowing their adaptation to multiple battery configurations, which makes them compatible with most standard installations.
Available models vary for 12 V and 24 V systems, with capacities ranging from 16 A to 100 A.
Warranty 5 years
