Phoenix Smart IP43 charger 12/50(3) 230V - VICTRON

Phoenix Smart IP43 charger 12/50(3) 230V - VICTRON

Input voltage: 230 VAC (range : 210 - 250 V)

DC input voltage: 290 - 355 VDC

Frequency: 45-65 Hz

Power factor: 0.7

Domestic battery charge: 30/50A

Mode low current: 15/25a

Weight 3.5 kg

Dimensions: 180 x 249 x 100 mm

Explore the many features of the Victron Phoenix Smart IP43 charger:

Phoenix Smart (1+1): It offers two outputs to simultaneously charge two banks of batteries. A second output, limited to approximately 4 A, is specially designed to charge startup batteries.

Phoenix Smart (3): Equipped with three DC outputs to charge three battery banks. Each output can provide the nominal current, but combined, the three outputs never exceed the nominal current of the charger.

Automatic voltage compensation: Automatically adjusts the output voltage to offset the voltage drop in CC cables when the CC current increases.

Adaptive charging algorithm in 6 steps: Optimizes the charging process according to the battery type and its use.

Adaptive absorption time: Automatically adjusts the absorption phase according to the discharge level of the battery to avoid overload or guarantee a complete recharge after a deep discharge.

Prevention of damage due to excessive release of gas through the BatterySafe mode: Limits the rate of increase of tension to avoid damage caused by excessive gas during rapid loading.

Storage mode to reduce ageing: Reduces the flotation voltage when the battery is not used to minimize the gas and corrosion of positive plates.

Compatibility with lithium-ion batteries (LiFePO4): Controlable via Bluetooth for accurate load management.

Programmable charging algorithm: Three pre-programmed algorithms available and adjustable via Bluetooth or interface VE.Direct.

Battery temperature and voltage sensor via Bluetooth (optional): Allows to monitor battery temperature and voltage for optimal charge.

Remote function/stop: Can be activated or deactivated remotely via switch, relay or specific cable.

VE.Interface direct: Provides a wired data connection to GX devices for advanced load management.

Programmable relay: Allows to trigger alarms and other events via VE.Direct or Bluetooth.

Synchronized charging: Possibility of synchronizing several chargers for a coordinated charge in a network VE.S.

Discover a new one dimension intelligent charge with the Victron Phoenix Smart IP43 charger.