Mastervolt battery charger Mass 24V/50A DNV GL (230V) - 2 outputs
The right choice for demanding conditions
Mass battery chargers are designed for the toughest conditions for professional, semi-professional and recreational purposes. Even under the most extreme conditions the products from the Mass series operate faultlessly, giving you round-the-clock output when necessary. The sustainability and technologies that underpin the Mass concept have long been proven in practice. With an MTBF of 180,000 hours at full capacity and 24/7 use, the Mass products are ideal for the toughest tasks and any situation that requires a reliable power supply.
Charging Lithium Ion batteries
Although Lithium Ion batteries are increasingly popular, there can be a lack of clarity when it comes to the charging process. This is not a problem with Mastervolt as the Mastervolt battery chargers communicate directly with the Lithium Ion battery via the integrated MasterBus (or have been adapted to the required charging voltages).
MasterBus compatible
Mass battery chargers can be easily connected to a MasterBus network with only one cable and one connection. You can also choose central, local or remote monitoring, configuration and control of your system.
Made tough by smart design
The certified Mass battery chargers are very strong, designed to withstand heavy vibrations and shocks. Their premium quality components meet the highest possible specifications, while the smart and extra robust mounting adds to the professional end result.
Specifications
|
General specifications |
Nominal output voltage |
24 V |
Total charge current |
50 A at 28,5 V |
Number of battery outlets |
2 |
Charge current second output |
3 A |
Battery bank size |
100-500 Ah |
Nominal input voltage |
230 V (180-265 V), 50/60 Hz |
Power supply mode |
yes |
Galvanic isolation |
yes |
Display/read-out |
LED display |
Dimensions, hxwxd |
340 x 261 x 130 mm
13.4 x 10.3 x 5.1 inch |
Weight |
4,6 kg
10.1 lb |
Compliance |
CE, ABYC A-31, RRR, RMRS |
|
Technical specifications |
Charge characteristic |
IUoUo, automatic 3-step+ for gel/AGM/wet/Lithium Ion |
Charge voltage Bulk |
28,5 V |
Charge voltage Absorption |
28,5 V |
Absorption time |
4 hours |
Charge voltage Float (wet batteries) |
26,5 V |
Charge voltage Float (Gel/AGM batteries) |
27,6 V |
Temperature sensor |
yes (inbegrepen) |
DC voltage compensation |
yes |
Power consumption (DC side) |
< 1 mA |
Full load consumption (230 V AC) |
1600 W |
Current Control function |
yes, through MasterBus |
Power factor control |
> 0,95 |
Temperature range (ambient temp.) |
-25 °C to 80 °C, afnemend > 40 °C
-13 °F to 176 °F |
Cooling |
vario fan |
Protection degree |
IP23 |
Protections |
over temperature, over load, short circuit, high/low battery voltage |
MasterBus compatible |
yes |
Charger Status Interface (alarm contact) |
yes |
|