Mastervolt Coupler - Charge Mate 2502 - 12/24V - 500A - IP21
The Mastervolt Mate Charge is an automatic battery relay that allows you to connect two battery groups when the voltage exceeds a preset value for at least 5 seconds, thus allowing you to load these two battery groups simultaneously.
The Mastervolt Mate Charge is an automatic battery relay allowing you to connect two battery groups when the voltage exceeds a preset value (✱13V (12V) / ✱26V (24V)) for at least 5 seconds, thus allowing you to load these two battery groups simultaneously.
When the voltage drops (
With a remote switch (optional), the Mate Load can be used as a parallel setting solenoid for emergency startups
Protection index : IP21
Dimensions: 90 x 80 x 85 mm
Weight 650 grams
Specifications
|
General specifications |
Battery voltage |
12/24 V |
Maximum current |
500 A |
Number of modes |
on, off, auto, start assist |
Dimensions, HxlxP |
90 x 80 x 85 mm 3,5 x 3,1 x 3,3.3 inches |
Weight |
0.65 kg 1.4 pounds |
|
Technical specifications |
Power consumption |
open switch: |
Starting run (250 ms) |
2000 A |
Starting voltage |
13-15 V (12 V) / 26-30 V (24 V) |
Start time |
30 sec |
Tension stop |
15 (12 V) / 30 V (24 V) |
Deadline |
3 minutes |
Relais |
electromechanical |
Temperature range (ambient temperature) |
-40 °C at 60 °C -40 °F |
Protection index |
IP21 |