Mastervolt coupler - Charge Mate Pro 40 - Detection auto 12/24V - 40A
The Mastervolt Mate Charge is an automatic battery relay that allows you to connect two battery groups when the voltage exceeds a preset value for at least 5 seconds, thus allowing you to load these two battery groups simultaneously.
Warranty 2 years
Mastervolt coupler - Charge Mate Pro 40 - Auto detection 12/24V - 40A
The Charge Mate Pro 40 provides an additional function by limiting the charging current of the secondary battery to 40A, so the main battery is charged as a priority.
| General specifications | ||
| Monitoring | lED indicators (alerts and status) | |
| Current output | limited to 40 A | |
| Number of battery outputs | 2 | |
| Input voltage range | 9-32V | |
| Parallel use | yes | |
| Battery voltage | 12/24 V automatic detection | |
| Switching functions | on, off, auto, start assist | |
| Dimensions, HxWxD | 157 x 140 x 80mm 6.2 x 5.5 x 3.1 inches |
|
| Weight | 0.88kg 1.9 pounds |
|
| Standards | THIS | |
| Technical specifications | ||
| Connection options | 3 x faston terminals (switch, ground and status) • switch: for an optional ON-OFF-ON switch for remote control • status: for optional LED indicator | |
| Power consumption | switch open: | |
| Types of batteries | all types (Lithium Ion protection via Multifunction Contact Output, ref. 77030500) | |
| Starting voltage | 13.5V (12V) / 27V (24V) | |
| Startup delay | 5 sec | |
| Voltage off | 12.75V (12V) / 25.5V (24V) | |
| Stop delay | 2,5 sec | |
| Relay | Electronic (by MOFSETs with very low voltage drop of 0.2 V max.) | |
| Temperature range (ambient temp) | -40°C to 60°C -40 °F |
|
| Protection sign | IP65 | |
Reference: TE-701-PM
Brand: MARINCO BEP
Single-polar electric battery 275A continuous - Panel mount - MARINCO BEP Continuous unipolar slaughter (455A intermittent - 1250A tip) - panel mount
Reference: TE-83116035
Brand: MASTERVOLT
Mastervolt Charge Splitter - Battery Mate 160A - 12/24V - 3 battery outputs The Battery Mate electronic charging divider allows you to simultaneously charge several battery parks from a single alternator/loader while insulating them between them.Warranty 2 years
Reference: TE-80-724-0006-00
Brand: MARINCO BEP
Remote key control for electric battery switch - MARINCO BEP
Reference: TE-772-DBC-EZ
Brand: MARINCO BEP
Battery coupler 1, 2, 1/2, Parallel, Off - 400A - Detachable facade - Marinco BEP
Reference: TE-83302502
Brand: MASTERVOLT
Mastervolt Coupler - Charge Mate 2502 - 12/24V - 500A - IP21 The Mastervolt Mate Charge is an automatic battery relay that allows you to connect two battery groups when the voltage exceeds a preset value for at least 5 seconds, thus allowing you to load these two battery groups simultaneously. Warranty 2 years
Reference: TE-54-35C2/DSP
Brand: MARINCO BEP
Piezo buzzer 97Db for electric battery switch 701-MDCZ - MARINCO BEP
Reference: TE-701-MDCZ-B
Brand: MARINCO BEP
275A single-polar electric battery with connector for buzzer piezo - MARINCO BEP Continuous unipolar electric battery cut (455A intermittent - 1250A tip)
Reference: TE-771-S-EZ
Brand: MARINCO BEP
Battery coupler 1, 2, 1/2, Off - 400A - With removable front - Marinco BEP
Mastervolt coupler - Charge Mate Pro 40 - Detection auto 12/24V - 40A
The Mastervolt Mate Charge is an automatic battery relay that allows you to connect two battery groups when the voltage exceeds a preset value for at least 5 seconds, thus allowing you to load these two battery groups simultaneously.
Warranty 2 years
