24V / 3A battery charger - ADELSYSTEM
- IMPUT 115-230-277-VAC
- OUTPUT : 3A
- Output: 24V / 3A
- The CB battery chargers are suitable for all types of batteries.
- Three load levels: Boost, Trickle and Recovery.
- Protections against short circuit, polarity inversion and overload.
- Automatic battery condition diagnosis: Signal for defective battery condition.
- Protection degree: IP20
- Mounting: RAIL DIN
The CB series is a "Switching" technology and a "battery care phosophie".
For years, these elements have been part of the fundamental know-how of ADEL System, leading to the development of this advanced battery charging method at several stages, fully automatic and adapted to meet the most advanced requirements of battery manufacturers.
The battery care concept is based on algorithms that implement a fast and automatic charge, optimization of battery charge over time, recovery of flat batteries and real-time diagnosis during installation and operation.
The real-time automatic diagnostic system, monitoring battery defects such as short-circuit elements, inverse polarity accidental connection, battery disconnection, can easily be detected and eliminate these problems thanks to the flashing of the diagnostic LED.
Each device is suitable for all types of batteries: thanks to horsemen, it is possible to define predefined curves for open lead acid, sealed lead acid, gel, Ni-Cd (optional). They are programmed for two load levels, boost and maintain.
A robust housing with a DIN rail mounting bracket offers an IP20 protection degree. They are extremely compact and economical.
TECHNICAL FUTURE |
Input voltage |
115-230-277 VAC |
Power |
72 W |
Exit |
3 A |
Output voltage |
24 V |
Dimensions |
45 X 115 X 135 mm |
Weight |
300 g |