Power supply 24V / 10A - ADELSYSTEM
Power supply 24V CBI2410A to supply access control, triggers, suction cups and any equipment that requires autonomy in the event of a sector cut.
- INPUT: 115/230 VAC
- OUTPUT: 10A
With All In One units (DC-UPS), it will be possible to optimize energy management.
to optimize energy management. The available power is automatically distributed between the charge and the battery.
charging is the first priority of the unit, so it is not necessary to double the power, because the power that goes to the battery is also used to power the charge.
It is therefore not necessary to double the power, because the power going to the battery will also go to the charge if it asks. The current The maximum current available on the charge output is twice the value of the device's nominal current In. We call "Battery Care" the concept based on algorithms that implement a fast and automatic charge, optimization of battery charge over time, recovery of discharged batteries and real-time diagnosis of installation and operation. Real-time automatic diagnostic system The real-time autodiagnostic system monitors battery faults such as battery sulfatage, short-circuit elements, accidental inversion of polarity inversion, connection or disconnection of the battery, they can be easily detected and eliminated using easily detected and eliminated using the flashing LED code;
during installation and after sale. Continuous monitoring of battery efficiency reduces the risk of battery damage and allows safe operation in permanent connection.
Each device is suitable for all types of batteries.
Using riders, it is possible to adjust predefined curves for open lead, sealed lead, gel, Ni-Cd (optional). They are programmed for two load levels,
load, boost and load, but they can be modified in a single load level by the user.
A robust case with a support for DIN rail mounting for DIN rail mounting, offers an IP20 protection degree.
They are extremely compact and cost-effective
TECHNICAL FUTURE |
Input voltage |
115-230 VAC |
Power |
240 W |
Exit |
10 A |
Output voltage |
24 VDC |
Dimensions |
110 X 115 X 135 mm |
Weight |
950 g
|