Enzo 400W bifacial solar panel - SOLENSO

Solar panel Enzo 400W bifacial - SOLENSO

The simplest solar installation to realize, to quickly produce your own energy! The solar installation Enzo offers different possibilities of installation, whether on terrace, flat roof, balcony, garden or even directly attached to the wall.

The Enzo solar station will adapt perfectly to the location you want.

The solar station Solenso Enzo 400 W is a bifacial solar panel, allowing to increase production efficiency and performance in case of low sunlight. Just plug the 400 W Full black panel into a power socket to enjoy the energy produced and thus reduce your electricity bill.

All you have to do is unpack, put, plug and enjoy.

KIT CONTENTS

The solar station

The connected socket

A 230V cable - 2m

Two trays to lester

Properties of the station

Cell type: half cell

Solar glass glass glass module much more resistant than conventional modules.

HIT cell technology (Ntype cell with better efficiency)

Bifacial module (the two sides produce energy) with a bifacial factor of 0.8

Panel yield: 22%

Micro-unduler yield: 99.8%

Weight 32 kg

IP67 station protection index

The wall mount is not provided with the solar station.

Guarantees

Panel warranty: 25 years

Microwave warranty: 25 years

Support guarantee : 10 years

Dimensions

The dimensions of the station: 1825x1045x72 mm

Weight of station: 32 kg

DOWN, POSEZ, BRANCHEZ AND PROFITEZ!

Designed to simplify solar installations.

The solar installation Enzo offers different possibilities of installation, whether on terrace, flat roof, balcony, garden or even directly attached to the wall.

The Enzo solar station will adapt perfectly to the location you want.

The solar panel is equipped with an inclinable support.

It is possible to screw this support on the ground or to wear it with a load to maintain its hold. Two trays are already included with this station. It is also possible to adjust the tilt from 15° to 35° in order to enjoy maximum production in summer and winter!

The support of the solar station can also come to the wall by adding the fastening legs (parts not provided with the solar station).

This time the inclination may vary between 55° and 75°. In addition, its Full Black design will melt into the decor.

PLUG AND PLAY!

The Enzo solar station combines efficiency and simplicity with its connection to a power socket.

The energy produced will be injected into your home and as a priority consumed by your appliances, which will allow you to reduce your electricity bills.

This solar station consists of a 400 W bifacial panel. The rays of the sun are captured by the front of the panel while the back of the solar panel can intercept the reverberation. The production of energy will therefore take place on the 2 sides of the solar module offering a significant yield (22%), as well as high performance especially in case of low sunshine.

The Enzo station does not allow the battery to be added and as any system connected to the network without storage, in case of power cut, the system stops. This is a regulatory obligation.

EMPORT YOUR STATION

Are you moving? Just unplug the panel and take it away.

The Enzo solar station includes a panel, inclinable support and a micro-undrive to transform the panel's energy into 230V.

Everything is already installed, you will only have to connect the panel to your electrical socket.

Limit your solar installation with 4 panels per electrical circuit, otherwise use several different circuits.

With a dedicated circuit, you can install up to 8 panels.

PRISE INTELLIGENTE & APPLICATION

This kit includes a connected socket with energy flow information, as well as a power meter to control your Enzo station in real time via a mobile application connected to a Wi-Fi network.

DO YOU WANT TO BE MORE OPEN?

You can plug several stations together, to mount up to 1,600 watts on a dedicated socket.