Phoenix Inverter 12V - 230V 500 VA (400 Watts) Pure Sinus VE.Direct Schuko - VICTRON
This VICTRON Energy converter belongs to the PHOENIX range that represents the small pure sinus converters to the best quality/market price ratio.
The performance is excellent around 90% and it is suitable for any type of battery. It is therefore the essential instrument of conversion for a photovoltaic or wind installation.
The Victron Phoenix 12/500 converter is recommended for a battery with a capacity greater than 60Ah in order to provide sufficient electricity to the converter.
High quality, manufactured by the world leader VICTRON (Netherlands)
Rated power: 500 VA (400 watts)
Fully configurable:
- Resetting levels and alarm activation in case of low battery voltage
- Reboot levels and cut in case of low battery voltage
- Exit voltage 210 - 245V
- Output frequency 50 Hz or 60 Hz
- ECO mode detection level and ECO mode switch
The port VE.Direct can be connected to:
- A computer ( Interface cable VE.Direct-USB necessary).
- Apple and Android smartphones, tablets and other devices (a Smart Bluetooth communicating with VE.Direct is necessary).
Cables not provided
TECHNICAL DONNECTIONS
Input voltage: 12V (range tolerance: 9.5V to 17V)
Output voltage +/-2 % : 230 V
Output at 25 °C: 400 W
Power of peak: 900 W
Operating temperature: -20 to +50°C (cooling by fan)
Dimensions (HxLxP in mm): 86x172x275
Weight 3.9 kg
VICTRON PHOENIX converters
VICTRON PHOENIX converters offer outstanding performance: exceptional performance (92% to 94% of the converted power), very high peak power (to cope with a point-of-energy overload, when some electrical appliances start) and very pure and perfectly constant electrical signal.
We recommend these converters for solar installations for small housing or holiday homes, rural electrification, mobile use on yachts or in motorhomes
They may also be used in commercial vehicles or for stationary industrial use (radiocommunication and measurement stations or telecommunication devices).
You can run the Phoenix converters (above 1200VA) in parallel and add their power. The configurations in three-phase are feasible using one or more devices for each phase.
We recommend not to plug the converter onto the solar regulator (consumer output), as in general the nominal power of the regulator is much higher than the maximum output amplifier of the regulator. A Victron converter connects to the battery(s), there is no deep discharge danger, as this type of converter detects when the battery voltage is too low.
VICTRON converter inverters
These Victron inverter converters transform the battery's continuous voltage into a stabilized alternative voltage, with the precision of the quartz: this is called a "Sinus Pur" voltage.
This allows you to power your most sensitive and demanding appliances (e.g., this level of precision is mandatory for microwaves).
The control of these inverters is very simple and the user is informed at any time of the operation status of the converter by light witnesses (DEL).
SinusMax technology allows accurate and high instant power
Developed for professional use, the VICTRON PHOENIX converter range is perfectly suited to the most diverse applications: these converters are compatible with all electrical appliances.
SinusMax technology allows very high instant power, impossible to achieve with conventional high frequency technology. Phoenix inverter converters are thus well suited to the power supply of devices that need a strong start-up call current, such as refrigeration compressors, electric motors and similar equipment.
The converter (or inverter) used in a photovoltaic or wind installation
The 12V/220V converter (also known as the inverter) transforms the continuous current of the batteries (12V, 24V or 48V) into an alternative current 230 volts.
Just connect the terminals located on the converter to the battery caps. The electrical appliances you want to power are then simply connected to the or outlets 220/230 V of the converter (nota: the sum of the power of the devices connected to the converter shall be less than the power indicated for the converter).
It is recommended to minimize the distance of the Cable Regulator - Battery and Battery - Onduleur (inferior to 6m) in order to avoid electricity loss.
Warranty 5 years
