Generator KS-6000iE-S - 5.5 kW - INVERTER - Single-phase 230V - Manual/Electric Start - Könner & Söhnen
Special functions : Gasoline, The protective case, Parallel connection, Connection possibility of an ATS unit, Economic mode
PURE SINE WAVE
The built-in electronic unit with microprocessor control monitors the operation of the generator and provides a stable output voltage of 230V 50Hz sinusoidal form, which is suitable for the reliable operation of sensitive electronics.
ROBUST ENGINE
The reliable proprietary K&S engine is characterized by increased wear resistance, long-term and stable operation as well as meets all European quality standards, including the latest EURO V emission standards.
ECONOMY MODE
The ECONOMY MODE reduces fuel consumption up to 50% at low loads due to reduced engine speed.
AUTOMATIC TRANSFER SWITCHKS ATS 4/25 Gasoline
The generator has an ATS output for connecting an ATS unit (Automatic Transfer Switch). The ATS unit automatically starts the generator and transfers the load to it when the main power supply is disconnected. The ATS output features an 8-pin connector for connecting the ATS unit KS ATS 4/25 Gasoline.
6-IN-1 MULTIFUNCTION LED DISPLAY
The 6-in-1 multifunction LED display has the following indicators: load indicator, fuel level indicator, hour meter, voltage, frequency, oil level indicator, overload indicator, working mode indicator.
ERGONOMIC CONTROL PANEL
Convenient location of all functions: working mode indicator, overload and short circuit protection, low oil level sensor, Reset button to reset the control system and restore voltage supply, connector for parallel connection of generators, typical 12 V car socket for a wide range of car devices, gadgets and battery charging, 230 V sockets and grounding terminal.
LOW NOISE LEVEL
Soundproof housing provides noise 70 dB (Lpa 7 m), comfortable use and convenient transportation and is equipped with transport system for easy handling.
HIGH QUALITY ALTERNATOR
Könner & Söhnen inverter generators are equipped with a robust brushless alternator with 100% copper winding. The high-end compact permanent magnet alternator is housed in a plastic casing and can withstand maximum loads without any damage to ensure long-term and reliable operation of the generator set.
PARALLEL CONNECTIONKS PU1
KS PU1 generator parallel unit from Könner & Söhnen® allows to increase the total output power of generators by connecting two inverter generators together. Parallel connection of any two generator models provides output power equal to the combined rated powers of these models. At the same time, parallel connection of generators entails a power loss of 0.2 kW of the aggregate rated power which can be obtained. It is suitable for all Könner & Söhnen® inverter generators which are parallel ready: KS 2000i S, KS 2000iG S, KS 4000iE S, KS 4000iEG S, KS 4100iEG, KS 6000iE S
TRANSPORT KIT
Könner & Söhnen Inverter generators are equipped with a transport system for easy movement. Two wheels and a handle that lifts when the generator is moved ensure comfortable transportation and mobility.
CHARACTERISTICS
Tension |
230 V |
Maximum power kW |
5.5 |
Rated power kW |
5.0 |
Frequency |
50 hz |
Max |
23.9 A |
Outlets |
1 x Schuko 230 V - 1 x EWC 230V 32A |
Start-up type |
Manual/Electric |
Fuel tank capacity |
11 litres |
Operating time * 50% charge*** |
- |
LED display |
The load, fuel level, frequency, voltage, time meter; oil level indicator, overload indicator, operating indicator |
Sound level at 7 meters in dB |
70/95 |
Output 12V, A |
12V/8.3A |
USB output |
5V/1A 5V2.1A |
Engine model |
KS 240i |
Engine cylinder |
223 cm3 |
Engine type |
Gasoline 4 times |
Engine power, ch. |
7.5 |
Possibility of connecting generators in parallel |
Yes |
Exit ATS |
Yes |
Volume of oil crankcase |
0.70 litre |
Alternator winding |
Copper |
INVERTER |
Yes |
Net weight in kg |
39.5 |
Gross weight in net kg |
43.4 |
Net dimensions LxlXH mm |
- |
Gross dimensions LxlXH mm |
640x425x600 |