Generator KS10000E-3 - Gasoline - 8 kW Three-phase 400V - AVR - Electric/manual start - Könner & Söhnen
25 litre tank - 15h to 50% charge - 71 dB(A) - 88 kg - Dimensions 680x545x550 mm
ENGINES
Specially for the Könner & Söhnen trademark German engineers have created K&S series engines, that have passed multi-hour and multi-level tests, that’s why they are so reliable. High-performance K&S engines comply with the latest EURO V emission standards.
INDIVIDUAL SERIAL NUMBERS ON ENGINES
Könner & Söhnen engines meet all world and European standards of quality, including the harmful emissions level and noise level. This is proved by European certificates of quality. Each engine and each generator have their own individual serial number, which allows us to control the quality of production and service. Könner & Söhnen motors have easy start and low vibration.
CONVENIENT ERGONOMIC CONTROL PANEL WITH ELECTIC START
Сonvenient and ergonomic panel of generator allows you to control the entire unit easily and does not require additional skills. The modern intelligent LED display will always indicate the number of hours worked, frequency and voltage output. The information on the display helps to control the device load and timely maintenance the generator, extending the life of the operation.
230V OR 400V
The presented series includes models for single- and three-phase consumers. The generator control panel with the ATS function has corresponding 230V and 400V mains terminals.
ALTERNATOR WITH 100% COPPER WINDING
TM Könner & Söhnen generators are equipped with a high-end synchronous alternator with 100% copper winding. It is only the copper winding that can withstand maximum loads without any damage to ensure long-term reliable operation of the generator set.
EASY START SYSTEM
Easy start system system allows you to start the engine quickly and to do this without much effort. For ease of use, generators of this type have two types of startup - manual and electric. More powerful models are additionally equipped with an electric start system.
STEEL TANK
“Könner & Söhnen” generators are equipped with an enlarged steel fuel tank, which extends the generator’s operating time without refueling. The fuel level indicator is located on the tank for ease of use.
DAMPERS TO LOWER VIBRATION
All models of the Könner & Söhnen generators are equipped with rubber feet to reduce vibrations. Thanks to the rubber damper, the working generator will not damage the floor covering, and the frame coating will not be scratched.
Data sheet:
Volt voltage |
400 V |
Maximum power kW |
8 |
Rated power kW |
705 |
Frequency |
50 hz |
Awesome |
14.45 A |
Outlets |
1 x Schuko 230V , 1 x EWC 400V 16A |
Fuel capacity in liter |
25 |
Operating time at 50% charge, *** |
3 p.m |
LED display |
Time counter, frequency; voltage |
Sound level at 7 meters in dB |
71/96 |
Output 12V, A |
12/8.3 |
Engine model |
KS 440 |
Engine type |
Gasoline, 1 cylinder, 4 time with air cooling |
Engine power, c. v./kW |
18.0/13.24 |
Oil crankcase volume - Litre |
1.2 |
Engine cylinder volume cm3 |
440 |
Voltage regulator |
AVR |
AVR |
Yes |
INVERTER |
No |
Start |
Manual / Electric |
Engine speed |
3000 rpm |
Alternator |
Copper |
Dimensions (LxlxH) mm |
680x545x550 mm |
Weight in kg |
88 |
Protection class |
IP23M |
Yearly warranty |
2 |
**In transient modes, the frequency of the current produced may change in the short term, i.e. during normal operation of the current generator, the deviation of the frequency indicator is acceptable. According to the type generator, engine and operating mode, frequency can be between 49 and 54 Hz
*** Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, generator technical status