Generator industrial KS-33-3DE-G - Fuel - AVR - 33 kVA - Three-phase 400V- Könner & Söhnen
The plant fuel three-phasee KS 33-3DE-G HEAVY DUTY of the German brand Könner & Söhnen is a generator reliable with a maximum capacity of 33 kVA.
The power plant is equipped with a low-speed 4-cylinder Deutz engine with liquid cooling. For more than 150 years, the German company Deutz has been producing engines fuel (including for automobiles and agricultural machinery), which combine modern technologies and materials, the highest quality, reliability and durability. Deutz engines operate successfully under the most unfavourable conditions and support maximum loads without reducing service life. In addition, the generator model fuel KS 33-3DE-G is equipped with a 4-pole broomless alternator with an automatic voltage control system, heating for winter use, with a 57-litre fuel tank designed for more than 15 hours of autonomous operation without refuelling (at an average charge of 50%, fuel consumption is 3.7 litres/hour), possibility to connect an automatic start/stop system, anti-vandal protection housing all the time with acoustic insulation and anti-corrosion galvanic coating.
Due to the company's own developments and adaptation to Könner's requirements & Söhnen, all power plants have a power reserve compared to the declared characteristics.
The powerful generator fuel KS 33-3DE-G is a professional unit developed using advanced technologies, while being an easy-to-use device that can provide energy to consumers three-phases and single-phases. To ensure versatility of use, the generator fuel is equipped with outlets protected current and power terminals for external consumer connections.
Generators fuel Könner & Söhnen takes into account all your needs in the organization of emergency power supply and for a longer power supply to residential buildings and small commercial facilities.
MOTOR SHOULD BE FIELDED
The modern Deutz engine, 1500 rpm at low speed offers optimal performance, has an increased resource for longer use, as well as reduced fuel consumption, thanks to which the brand's power plants are among the most cost-effective in terms of cost. The electronic control system automatically adjusts the engine speed, reacts quickly to load changes, improves the quality of the electrical energy produced and guarantees the stable frequency of 50 Hz.
WATER REFRIIDIZATION
The engine water cooling system ensures reliable operation of the unit and protects the engine from premature wear. Thanks to the efficient cooling of the engine, this generator can operate at high ambient temperatures.
PRECHAUFFAGE WITH DEMARKING
The engine heating system facilitates starting the power plant without too much load on the engine, even at sub-zero temperatures during the cold season.The system automatically warms the engine water jacket to the required temperature, maintains the engine temperature to ensure easy starting in any weather.
NUMBER CONTROL
All processes are managed using a modern multifunctional digital control unit. The controller checks the state of operation of the power plant, the practical settings for the start-up and operation of the installation, monitors the battery load, monitors the engine speed and adjusts the fuel supply to the load, protects against overheating and low oil levels, reports possible malfunctions, and the need for maintenance.
VANDAL-PROOF SOUNDPROOF ENCLOSURE
The high-quality soundproof housing offers significant noise reduction during installation operation, improves thermal dispersion, protects the power plant from moisture and condensation, adverse weather conditions and unauthorized interventions. The relatively small size of the power plant offers more possibilities for its placement. The corrosion-resistant powder coating contributes to a longer unit life.
In addition, low-speed engines with a reduced vibration level are mounted on anti-vibration skates, which also contributes to quieter operation and reduces the load on the foundation.
The power plant has an emergency stop button (STOP) for quick engine shutdown.
FACILITY OF MAINTENANCE
The housing has holes for mounting means of transport, which facilitates the shipping, transport and installation of the unit. Wide hinged doors on both sides of the housing allow unhindered access to the unit parts and to the main components of the generator fuel for a practical interview.
WORK OF THE SERVICE IN EUROPE
In Europe in our own service centre power plants fuel of Könner & Söhnen undergoes a preparation and a start test with control of compliance with all operating parameters. On a special charging stand, the power generated by the power plant in different operating modes is checked, the electronic control unit is adjusted.
SUMMARY
The plant fuel Könner & Söhnen KS 33-3DE-G is a professional unit based on a reliable Deutz engine with the best performance. Reinforced parts and mechanisms, fasteners and stronger connections, all contribute to less wear and tear and reliable operation of the generator.
By carefully controlling each stage of production of Könner products & Söhnen, we have created a series of power plants for you fuel high quality "HEAVY DUTY Silent Fuel Generator", which will serve our customers for many years.
All Könner power plants & Söhnen has been rigorously tested, ensuring high performance and maximum productivity.
CARACTERISTICS
Tension |
400 V (230V) |
Maximum power kVA |
33 |
Nominal power kVA |
30 |
Frequency |
50 hz** |
Max |
47.63 A |
Outlets |
1 x Schuko 230V - 1 x EEC 400V 16A - 1 x EEC 400V 32A |
Operating time at 50% charge*** |
3 p.m |
Fuel consumption |
3.7 L/h (50% load) |
Type of case |
Soundproof, moistureproof, weather resistant, anti-vandalism with galvanized coating |
Sound level, Lpa (7m)/Lwa, dB |
72/97 |
Type of controller |
Multifunctional Digital Control Unit |
Controller model |
Datakom D300 |
Type of alternator |
Type Stamford, synchronous, self-exciting system, broomless alternating current, 4 poles |
Engine type |
Fuel 4 cylinders with water cooling, 4 strokes |
Engine mark |
Deutz |
Engine speed turns/min |
1500 |
Engine model |
BFM3 G2 |
Cooling |
Liquid |
Engine speed control system |
Electronics |
Preheating before starting |
Yes |
Tank capacity, liter |
57 |
Volume of oil crankcase, liter |
5.5 |
Volume of coolant, litre |
10 |
Engine cylinder volume, cm3 |
3168 |
Voltage regulator |
High efficiency AVR voltage control electronic system |
Battery, A-h |
85 |
Battery charger |
Integration |
Net dimensions LxlXH mm |
2160x950x1250 |
Gross dimensions LxlXH mm |
2190x980x1270 |
Weight net, kg |
856 |
Weight gross, kg |
859 |
Protection class |
IP54 |
Allowable deviation from normal voltage |
not more than 5% |
Warranty |
2 years |
**In transient modes, the frequency of the current produced may change in the short term, i.e. during normal operation of the current generator, the deviation of the frequency indicator is acceptable. According to the type generator, engine and operating mode, frequency can be between 49 and 54 Hz
***The fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition