Generator industrial KS-25-3LM - Fuel - 25.3 kVA - AVR - Three-phase 400V - Könner & Söhnen

Generator industrial KS-25-3LM - Fuel - 25.3 kVA - AVR - Three-phase 400V - Könner & Söhnen

The plant fuel three-phasee KS 25-3LM HEAVY DUTY of the German brand Könner & Söhnen is a generator reliable with a maximum capacity of 25.3 kVA.

The generator fuel KS 25-3LM based on a low-speed 4-cylinder Laidong engine with liquid cooling is an economically advantageous offer from TM Könner & Söhnen. It meets all European quality standards, has a high level of safety, which allows you to use this device not only in daily life, but also in industry. In addition, the generator model fuel KS 25-3LM is equipped with a 4-pole broomless AC alternator with an automatic voltage control system, heated for winter use, with a 57-litre fuel tank designed for 14 hours of autonomous operation without refuelling. (with an average fuel consumption load of 50%, fuel consumption is 4.1 litres/hour), the possibility to connect an automatic start/stop system, an anti-vandal protection housing all the time with sound insulation.

The generator fuel KS 25-3LM is a powerful unit equipped with control of all key parameters of the operating state, it can power consumers three-phases and single-phases. Due to the implementation of the company's own developments and adaptation to Könner's requirements & Söhnen, all power plants have a power reserve compared to the declared characteristics.

Generators fuel Könner & Söhnen takes all your needs into account in the organization of emergency power supply and for a longer power supply to residential buildings and light commercial facilities.

FIELD-BASED LAIDONG MOTOR

Laidong's low-speed engine runs at 1,500 rpm, which offers the possibility of reducing fuel consumption, reducing acoustic pressure and also helps to increase service life through lower revolutions. The engine speed mechanical control system regulates the engine turn and controls the quality of the electrical energy produced by the power plant.

WATER REFRIIDIZATION

The engine water cooling system ensures reliable operation of the unit and protects the engine from premature wear. Thanks to the efficient cooling of the engine, this generator can operate at high ambient temperatures.

PRECHAUFFAGE WITH DEMARKING

The engine heating system facilitates the start of the power plant without too much load for the engine, even at temperatures below zero during the cold season. The system automatically warms the engine water liner to the required temperature, maintains the engine temperature to ensure an easy start at all times.

NUMBER CONTROL

All processes are managed using a modern multifunctional digital control unit. The controller checks the state of operation of the power plant, the practical settings for the start-up and operation of the installation, monitors the battery load, monitors the engine speed and adjusts the fuel supply to the load, protects against overheating and low oil levels, reports possible malfunctions, and the need for maintenance.

ANTI-VANDALISM BOXER

The high-quality soundproof housing offers significant noise reduction during installation operation, improves thermal dispersion, protects the power plant from moisture and condensation, adverse weather conditions and unauthorized interventions. The relatively small size of the power plant offers more possibilities for its placement. The corrosion-resistant powder coating contributes to a longer unit life.

In addition, low-speed engines with a reduced vibration level are mounted on anti-vibration skates, which also contributes to quieter operation and reduces the load on the foundation.

The power plant has an emergency stop button (STOP) for quick engine shutdown.

FACILITY OF MAINTENANCE

The housing has holes for mounting means of transport, which facilitates the shipping, transport and installation of the unit. Wide hinged doors on both sides of the housing allow unhindered access to the unit parts and to the main components of the generator fuel for a practical interview.

WORK OF THE SERVICE IN EUROPE

In Europe in our own service centre power plants fuel of Könner & Söhnen undergoes a preparation and a start test with control of compliance with all operating parameters. On a special charging stand, the power generated by the power plant in different operating modes is checked, the electronic control unit is adjusted.

SUMMARY

By carefully controlling each stage of production of Könner products & Söhnen, we have created a series of power plants for you fuel high quality "HEAVY DUTY Silent Fuel Generator", which will serve our customers for many years.

All Könner power plants & Söhnen has been rigorously tested, ensuring high performance and maximum productivity.

**In transient modes, the frequency of the current produced may change in the short term, i.e. during normal operation of the current generator, the deviation of the frequency indicator is acceptable. According to the type generator, engine and operating mode, frequency can be between 49 and 54 Hz

***The fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition