![KS-ATS-4/63HD automatic starter unit - ATS box for generator fuel - Könner & Söhnen KS-ATS-4/63HD automatic starter unit - ATS box for generator fuel - Könner & Söhnen](https://pros-r.com/14019-large_default/ks-ats-4-63hd-automatic-starter-unit-ats-box-for-generator-fuel-konner-sohnen.jpg)
Reference: SM-3.1-D
Brand: FERBO
TTY box for 16000ST-YW generators / 18000-ST-KW / 24000-ST-KW FERBO
For FERBO water cooling generators Assembly factory to order with the Group
€559.20 including tax
Universal automatic transfer switch (ATS) for 230V and 400V - Max 400V current: 63A
Warranty 2 years
The universal automatic transfer switch (ATS) for 230V and 400V.
It automatically starts the generator and transfers the load to it when the main power is disconnected and automatically stops the generator when the main power is restored.
Universal design allows use in networks single-phases and three-phases
Equipped with a 4-pole motorized switch 63A
Multifunction programmable controller
Automatic / Manual Control Mode
Generator emergency shutdown button
Make sure the battery is always charged
6 pin control cable connector (ATS)
UNIT EQUIPTED WITH A PROGRAMMED CONTROLER:
Automatic/manual mode;
Programming the waiting time before the engine starts after a power outage;
Programming the engine heating time before connecting a load;
Setting the starter operating time;
Control of engine operation;
MOTORIZED INTERRUPER 230V/400V
The special design of the switch protects the generator from the turning voltage of an external network;
Possibility of mechanical and electrical locking;
Possibility of manual switching between power lines in the event of failure of the control unit;
The ATS KS ATS 4/63HD unit model is suitable for all generators fuel « Könner & Söhnen" with the abbreviation ATSR in the model name.
Data sheet:
Battery voltage | 12V/DC |
Running (max) 400 V | 63A |
Working environment | -10 +55 °C humidity: |
Storage environment | -10 +70 °C humidity: -60 % |
Maximum battery charge by integrated power | 2A |
Cable length | 4.4 m |
Voltage V | 230V / 400V |
Protection class | IP41 |
Net dimensions LxlxH mm | 320x190x400 |
Gross dimensions LxlxH mm | 420x220x520 |
Weight net kg | 8.4 |
Weight gross, kg | 8.8 |
Reference: SM-3.1-D
Brand: FERBO
For FERBO water cooling generators Assembly factory to order with the Group
Reference: AY-5430436
Brand: AYERBE
Adapted to generators Energen electric start AYERBE Power 25 AMP Warranty 1 year
Reference: SM-10
Brand: FERBO
Connection of a separate automatic power cut-off panel for generator FERBO Assembly factory to order with the Group
Reference: DX-KS-7KIT
Brand: KONNER & SOHNEN
The transport kit, which includes 2 wheels, 2 feet support, half axle and 2 handles. Diameter 20.5 cm - Dimensions 670x300x90 mm
Reference: IME-290000001
Brand: IMER FRANCE
For the transport of generator EXPERT 3010 /4010 - ACCES 3400 - with 2 large wheels full
Reference: FG-69277
Brand: ITC POWER
The parallel connection kit allows you to connect two units of KGG34Ei-DF or KGG20i-DF to double the power.
Reference: SM-4
Brand: FERBO
20 L tank kit for generator on FERBO chassis Assembly factory to order with the Group Warranty 1 year
Reference: SM-37-A
Brand: FERBO
For generator with manual water cooling Assembly factory to order with the Group Warranty 1 year
Universal automatic transfer switch (ATS) for 230V and 400V - Max 400V current: 63A
Warranty 2 years