Generator KS-8100HDE - Diesel - 6.5 kW - AVR - Single-phase 230V - Electrical startup / Manual - Könner & Söhnen
ENGINES
Engines for both diesel and gasoline generators are manufactured under the license of DIMAX Int. GmbH and are marked with K&S logo. High power of engines in relation to the alternator allows to receive the declared power output and maintain stable work at any load. All engines are tested for continuous operation, and then disassembled and examined for trouble-shooting purposes. Each engine and each generator have an individual serial number, which allows us to control the quality of production and service. The engines meet all European quality standards, including the latest EURO V emission standards.
INCREASED ENGINE RESOURCE
Könner & Söhnen® diesel generators of the "HEAVY DUTY" series have an increased motor resource - so they have a longer service life, can work for more hours without a break. The engine resource exceeds 3000 working hours, this is confirmed by multi-hour, multi-level tests and warranty. To show high performance, machines should be maintained properly.
ERGONOMIC CONTROL PANEL
Convenient and ergonomic generator's control panel allows you to control the entire unit easily and does not require additional skills. The modern intelligent LED display will always indicate the number of hours worked, frequency and voltage output. The information on the display helps to control the device load and timely maintain the generator, extending the operation life.
PREHEATER FUNCTION
All Heavy Duty series generators are equipped with a preheat function, which allows you to easily start a generator in winter.
AVR
“Könner & Söhnen” series diesel generators are equipped with intelligent voltage stabilization system AVR. It allows to keep the voltage at a constant value of 230 V and protects against unwanted short circuits.
ENFORCED FRAME
Additional frame reinforcement with the upper protective strips allows HEAVY DUTY professional series generators to operate in a more rigid mode. The reinforced frame structure protects the tank against damage during operation and transportation.
DAMPERS TO LOWER VIBRATION
All models of Könner & Söhnen generators are equipped with rubber feet to reduce vibrations. The working generator will not damage the floor covering, and the frame coating will not be scratched.
ACCESSORIES SET
Generator is equipped with additional accessories: a portable 2P+PE 16A 230V power plug, a portable 2P+E 230V 32A power plug, a 8x10mm hook key, 12x14mm and 17x19mm keyholes and a two way 6.0mm PH2 screwdriver.
Data sheet:
| Volt voltage |
230 V |
| Maximum power kW |
6.5 |
| Rated power kW |
6.0 |
| Frequency |
50 hz |
| Awesome |
28.26 A |
| Outlets |
1 x Schuko 230V , 1 x EWC 230V 32A |
| Fuel capacity in liter |
11 |
| Operating time at 50% charge, *** |
6.9 hours |
| LED display |
Time counter, frequency; voltage |
| Sound level at 7 meters in dB |
71/96 |
| Output 12V, A |
12/8.3 |
| Engine model |
KS 440 |
| Engine type |
Diesel 4 time |
| Engine power, c. v./kW |
12/8.83 |
| Preheating before starting |
+ |
| Oil crankcase volume - Litre |
1.65 |
| Engine cylinder volume cm3 |
456 |
| Voltage regulator |
AVR |
| AVR |
Yes |
| INVERTER |
No |
| Start |
Manual / Electric |
| Engine chassis diameter, round, mm |
32 |
| A-h battery |
30 |
| Exit ATS |
- |
| Dimensions LxlxH mm |
730x495x630 |
| Weight in kg |
117 |
| Protection class |
IP23M |
| Yearly warranty |
2 |
**In transient modes, the frequency of the current produced may change in the short term, i.e. during normal operation of the current generator, the deviation of the frequency indicator is acceptable. According to the type generator, engine and operating mode, frequency can be between 49 and 54 Hz
*** Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, generator technical status
Warranty 2 years
