Generator KS-8100HDE-1/3-ATSR - Fuel - AVR - 6.5 kW - Three-phase 400V - Electrical Start / Manual Konner & Sohnen

Special functions VTS 230/400 V, Possibility of connecting a ATS unit, Heating before starting, Fuel 1 cylinder, Air cooling

MARKING MOTERS

Engines for generators fuel and for generators gasoline are manufactured under license by DIMAX Int. GmbH and are marked with their own logo. In all models, the power reserve of the engine compared to that of the alternator allows to generate the declared voltage and to maintain its stability throughout the range charges. All engines are tested by continuous and long operation, after which they are disassembled for fault detection. Each engine and generator has an individual serial number, which allows us to control the quality of production and service. Engines meet all global and European standards of quality, economy and respect for the environment.

VTS SYSTEM

VTS system The innovative and unique VTS (Voltage Transfer Switch) phase switching system allows the use of a single generator for electricity consumers single-phases (230V) and three-phases (400V) with virtually no power loss.

OUTSIDE ATS

The generator is suitable for connecting the ATS system (automatic transfer switch). The ATS output has a universal 6 pin connector, which does not limit the choice of automatic transfer switch.

LIFE DURATION OF PROLONGED MOTORS

Generators fuel Könner & Söhnen® series "HEAVY DUTY" have an increased motor resource - they therefore have a longer life, can operate for more hours without interruption. The engine resource exceeds 3000 hours of work, which is confirmed by tests and a multi-hour and multi-level warranty. To display high performance, the machines must be properly maintained.

ERGONOMICAL AND PRACTICES

The ergonomic and practical panel makes it easy to control the entire unit and does not require particular skills. The modern multifunction LED display shows the frequency, voltage and number of working hours. The information on the screen makes it easy to control the quality of the voltage provided by the generator.

BREAKDOWN BEFORE MARRIAGE

Generators fuel of the HEAVY DUTY series are equipped with the preheating function which allows to start the generator in winter without effort.

AVR

The Könner generators & Söhnen from the HEAVY DUTY series are equipped with the intelligent voltage stabilization system AVR. It allows you to maintain the generator output voltage at a constant value of 230V and protects you against unwanted short circuits and overloads.

ENHANCED FRAMEWORK

Thanks to the additional reinforcement of the frame with the upper protection bars, the generator of the professional series "HEAVY DUTY" can be used more rigidly, the construction of the reinforced frame also protects the tank from damage during operation and transport.

SUPPORT FOR THE PROTECTION OF THE FRAMEWORK

For all models of generators fuel ‘Könner & Söhnen", additional rubber supports are included in the kit for protecting the frame against corrosion. Thanks to the supports, the generator when started will not damage the floor covering and the frame paint will not be scratched. You can also buy a transport kit.

SUPPLEMENTARY ACCESSORIES

The generator is complemented by additional accessories: electric portable socket 2Р+Р的 16×230V, electric portable socket 2P+.

Data sheet:

**In transient modes, the frequency of the current produced may change in the short term, i.e. during normal operation of the current generator, the deviation of the frequency indicator is acceptable. According to the type generator, engine and operating mode, frequency can be between 49 and 54 Hz

*** Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, generator technical status