Generator NT-8000LE-T Diesel - Single-phase 5.2 kW / Three-phase 6.4 kW - AVR - Electric/manual start - KOMPAK

Generator NT-8000LE-T Diesel - Single-phase 5.2 kW / Three-phase 6.4 kW - AVR - Electric/manual start - KOMPAK

ATS compatible

MOTORISATION

Kompak generators use Kompak motors, they are all equipped with oil level alarm

4-stroke motor with OHV head valves, 498 cc, 13 cv - The exhaust silencer reduces sound emissions

GENERATRICE

The alternator is 100% copper to allow quality electricity production in a sustainable way

The group is equipped with an AVR system (Automatic Voltage Regulator) with margin of variation of 1.5% (most of our competitors offer groups with AVR to 5%)

The AVR delivers a pure sinusoidal signal for a quality of electricity perfectly adapted to the needs of the devices you connect to, even sensitive such as mobile phone, computer etc.

The generator delivers as well from 230 V in single-phase 400 V three-phase

Maximum power in 230V: 5200W / 400V: 6400W

Rated power in 230V: 4800W / 400V: 6000W

The generator of this generator can withstand phase imbalances of 100%, within a third of the total power of the group per phase.

CONTROL DATA

Equipped with an electronic display to control voltage, amplification, the number of hours of use.

1 taken three-phasee 400V/32 A, 1 socket single-phase 230V/32 A

ATS connector for automatic start-up in case of EDF cut

Auto" connection for connection to a photovoltaic installation without additional housing

2 keys for electric startup

2 thermal circuit breakers for safety.

DEMARRAGE SYSTEM

The electric starter allows immediate and effortless startup. In case of need, the start can also be done manually with the classic rope launcher.

The startup can also be done automatically by ATS, so you will need the ATS 230V or 400V or remotely by connecting a remote on the ATS socket

SECURITY - ENVIRONMENT

The generator Kompak NT-8000LE-T is equipped with multiple SECURITE systems.

SECURITY oil level: if the oil level is too low, the engine cuts automatically.

SECURITE overheated: if the operating temperature increases abnormally, the engine will cut automatically.

SECURITE surtension: If the system detects an overload level too high, the output current is stopped while keeping the engine on its way.

Data sheet