|
Battery charger specifications |
Battery temperature sensor |
yes, included |
Battery voltage measurement |
yes |
|
General specifications |
Witnesses |
yes, tri-color LED |
Output voltage |
10-15V |
Rated output voltage |
12V |
Output voltage stabilization |
2% at extreme temperatures, charging and input |
Output voltage distortion (peak) |
max. 1% |
Maximum output power |
750W |
Rated output power |
710W |
Maximum output current |
50A |
Output load current (3-step mode) |
50A |
Rated input voltage |
24V |
Input voltage range |
19-30V |
Maximum input current |
30A |
Galvanic isolation |
no |
Limited voltage |
yes |
Yield |
> 95% (at nominal input voltage, full load); peak 97% |
Parallel use |
yes |
Alarm contact |
yes, via MasterBus |
Power supply via MasterBus |
no |
Motor running signal input |
yes (high active/low active) |
DIP Switches |
yes, for basic settings |
Dimensions, HxWxD |
255 x 165 x 66 mm 10.0 x 6.5 x 2.6 inches |
Weight |
2kg 4.4 pounds |
Standards |
CE, E-Mark, SAE J1171 & ISO 8846 Ignition Protected |
|
Technical specifications |
Empty consumption |
|
Charging characteristics |
3-steps+ |
Types of batteries |
wet, Gel, AGM, hairspring, Lithium Ion, traction, user defined |
3-stage charging option |
yes (DIP switch settings) |
DC consumption |
|
Connections |
3 M8 terminations for 10-50 mm² cable, (positive input, positive output, common negative); 6-conductor screw connection for 0.75-1.5 mm² cables (remote on/off control, temperature sensor, voltage measurement) |
Temperature range (ambient temp) |
-25°C to 60°C; decreasing > 40 °C -13°F to 140°F |
Cooling |
natural |
Protection sign |
IP23 |
Protection |
overload, overheating, DC short circuit, reverse polarity (fuse) |
MasterBus compatible |
yes |