Mastervolt Coupler - Charge Mate Pro 90A - 12/24V
The Mastervolt Mate Charge is an automatic battery relay that allows you to connect two battery groups when the voltage exceeds a preset value for at least 5 seconds, thus allowing you to load these two battery groups simultaneously.
Warranty 2 years
Coupleur Mastervolt - Charge Mate Pro 90A - 12/24V
Load relay with electronic current control, high efficiency and
protection against polarity inversion
The Mastervolt Charge Mate is an automatic battery relay for connecting two battery banks when the voltage exceeds a preset value for at least 5 seconds, allowing both battery banks to be charged simultaneously.
| General specifications | ||
| Monitoring | lED indicators (alerts and status) | |
| Current output | limited to 90 A; 25 °C descending power | |
| Number of battery outputs | 2 | |
| Input voltage range | 9-32V | |
| Parallel use | yes | |
| Battery voltage | 12/24 V automatic detection | |
| Switching functions | on, off, auto, start assist | |
| Dimensions, HxWxD | 157 x 140 x 80mm 6.2 x 5.5 x 3.1 inches |
|
| Weight | 0.88kg 1.9 pounds |
|
| Standards | THIS | |
| Technical specifications | ||
| Connection options | 3 x faston terminals (switch, ground and status) • switch: for an optional ON-OFF-ON switch for remote control • status: for optional LED indicator | |
| Power consumption | switch open: | |
| Types of batteries | all types (Lithium Ion protection via Multifunction Contact Output, ref. 77030500) | |
| Starting voltage | 13.5V (12V) / 27V (24V) | |
| Startup delay | 5 sec | |
| Voltage off | 12.75V (12V) / 25.5V (24V) | |
| Stop delay | 2,5 sec | |
| Relay | Electronic (by MOFSETs with very low voltage drop of 0.2 V max.) | |
| Temperature range (ambient temp) | -40°C to 60°C -40 °F |
|
| Protection sign | IP65 | |
Reference: TE-700
Brand: MARINCO BEP
Easy-Fit Unipolar Cup 275A continuously - MARINCO BEP Continuous unipolar slaughter (455A intermittent - 1250A tip)
Reference: TE-701-MDCZ-B
Brand: MARINCO BEP
275A single-polar electric battery with connector for buzzer piezo - MARINCO BEP Continuous unipolar electric battery cut (455A intermittent - 1250A tip)
Reference: TE-83304002
Brand: MASTERVOLT
Mastervolt coupler - Charge Mate Pro 40 - Detection auto 12/24V - 40A The Mastervolt Mate Charge is an automatic battery relay that allows you to connect two battery groups when the voltage exceeds a preset value for at least 5 seconds, thus allowing you to load these two battery groups simultaneously. Warranty 2 years
Reference: TE-83007030
Brand: MASTERVOLT
Mastervolt Diode Charge Splitter - BI 25/50A - 3 battery parks The BI diodes charge divider allows to load several battery parks simultaneously from a single alternator/loader while insulating them between them.Warranty 2 years
Reference: TE-83007021
Brand: MASTERVOLT
Mastervolt Diode Charge Splitter - BI 25/50A - 2 battery parks The BI diodes charge divider allows to load several battery parks simultaneously from a single alternator/loader while insulating them between them.Warranty 2 years
Reference: TE-54-35C2/DSP
Brand: MARINCO BEP
Piezo buzzer 97Db for electric battery switch 701-MDCZ - MARINCO BEP
Reference: TE-772-DBC
Brand: MARINCO BEP
Battery coupler 1, 2, 1/2, Parallel, Off - 400A - Pro Installer - Marinco BEP
Reference: TE-720
Brand: MARINCO BEP
600A Continuous Unipolar Slaughter Cup - MARINCO BEP Continuous unipolar slaughter (800A intermittent - 2500A tip)
Mastervolt Coupler - Charge Mate Pro 90A - 12/24V
The Mastervolt Mate Charge is an automatic battery relay that allows you to connect two battery groups when the voltage exceeds a preset value for at least 5 seconds, thus allowing you to load these two battery groups simultaneously.
Warranty 2 years
