PB1 85 self-priming pallet electropump fuel - 85 l/mm - 24 V - Cable 4 m - ADAM PUMPS
Electropompe 24 V made of a permanent magnet motor
Solid and robust motor ensuring high reliability even at low temperature.
The pump is designed to be used at low temperature.
Self-priming pallet pump made of cast iron bodies, fried steel wheel and acetal resin pallets.
Acetal resin pallets.
Integrated derivation valve and stainless steel filter.
Support provided for pump attachment.
- 4 metre cable included
- flow rate 85 l/min
- Entries/outputs: 1" BSP-G
- dimensions 290 x 190 x 210 mm
- Weight 10 kg
Characteristics PB1 85
AC voltage (V / Hz) |
12- 24 |
Maximum current (A) |
40 - 32 |
Power (W) |
480 - 708 |
Buse (A) |
40 - 40 |
Engine protection |
IP 55 |
Switch/stop |
Yes |
Cable (m) |
4 m |
Operating cycle (min) |
S2 30 |
Nominal flow rate (L/mm: GPM) |
85 / 22.45 |
Maximum pressure [bar / psi] |
2.4 / 35 |
Dry suction height (m) |
2 |
By-Pass interne |
Yes |
Entrance (BSP - G) |
1° F |
Output (BSP - G) |
1° F |
Pump body material |
Fonte |
Material wheel |
Fried steel |
Ailette material |
POM |
Ring material |
HNBR |
Attachment material |
NBR |
Internal filter |
Yes |
Engine support |
Yes |
Temperature min/max (°C) |
-20/+50 |
Maximum fluid viscosity (cSt) (40°C) |
2 ÷ 5 |
Compatible fluids |
fuel |
Unauthorized |
Gas, alcohol, water, gasoline, kerosene |
Sound intensity less than 1 metre (dB) |
70 |
Weight net (kg) |
9 |
Weight gross (kg) |
10 |